Read Sony ILCE-5000L / ILCE-5000Y (serv.man2) Service Manual online
ILCE-5000L/5000Y_L2
2-7
2-1-4. IMAGER BLOCK SECTION
ns: not supplied
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
151
A-1954-964-A SERVICE, MECHA DEVICE (1100) (Note 5)
152
4-430-446-01
SHEET (IS) (720), RADIATION
153
Selection Parts IMWASHER (A), ADJUST (Note 2, 3)
154
Selection Parts IMWASHER (B), ADJUST (Note 2, 3)
155
Selection Parts IMWASHER (C), ADJUST (Note 2, 3)
156
A-1905-698-A MB CHARGE UNIT(762) (Note 4)
157
1-492-255-11
SHUTTER UNIT (H129)
158
A-1932-986-A MB N HOLDER ASSY (SERVICE 762)
159
4-527-888-01
SHEET (MD (773))
* 160
4-186-538-01
SPRING, LENS LOCK
161
X-2586-035-1 MB L LOCK PIN ASSY (762)
162
4-456-086-01
BUTTON, LENS LOCK (BLACK)
162
4-456-086-11
BUTTON, LENS LOCK (SILVER, WHITE, PINK)
* 163
4-185-963-01
MB N PLATE SP (Note 7)
164
4-284-623-01
MB N PLATE (B) 755
165
4-283-999-03
MB N PLATE A (754)
166
4-188-536-01
CAP, BODY (Note 6)
#9
3-078-890-21 SCREW,
TAPPING
#197
4-185-990-01
MB SCREW, CHARGE UNIT FIXED
#230
4-287-434-01
TAPPING (1.7 (ECOLOGY))
DISASSEMBLY
1. Remove in numerical order (
1
to
2
) in the left figure.
Screw
#9: M1.7 X 5.0 (Tapping)
(Silver)
3-078-890-21
3-078-890-21
5.0
1.7
1
#9 X 3
#9
Back View
2
#230 X 3
#197: M1.6 X 4.5 (Tapping)
(Silver)
4-185-990-01
4-185-990-01
4.5
1.6
#230: M1.7 X 4.0 (Tapping)
(Black)
4-287-434-01
4-287-434-01
4.0
1.7
Note 1: Refer to “Assembly-3: Screw tightening sequence when
assembling the Radiation Plate (IM)” when you assemble.
Note 1: 組立時は Assembly-3: Screw tightening sequence when
assembling the Radiation Plate (IM) を参照してください。
Note 2: The IM adjust washers (A, B, C) differ in thickness.
Make sure to return the removed IM adjust washers to origi-
nal places.
nal places.
When replacing IM adjust washers, refer to “2-2. SELEC-
TION PARTS” on page 2-10.
TION PARTS” on page 2-10.
If the original state cannot be restored due to loss of the
IM adjust washer, for example, replace the Device Unit
(Service).
IM adjust washer, for example, replace the Device Unit
(Service).
Note 2: IM調整ワッシャ (A, B, C) は，それぞれ厚さが異なります。
取り外したIM調整ワッシャは，必ず元の位置に戻してくださ
い。
い。
また，IM調整ワッシャを交換する際は，2-10ページの 2-2.
SELECTION PARTS を参照してください。
IM adjust washerを紛失するなどして元の状態に戻せなく
なった場合は，Device Unit (Service) を交換してください。
なった場合は，Device Unit (Service) を交換してください。
Note 3: Refer to “Assembly-4: IM Adjust Washer (A, B, C) putting
position” when you assemble.
Note 3: 組立時は Assembly-4: IM Adjust Washer (A, B, C) putting
position を参照してください。
Note 4: Refer to “Assembly-5: Screw tightening sequence when
assembling the MB Charge Unit” when you assemble.
Note 4: 組立時は Assembly-5: Screw tightening sequence when
assembling the MB Charge Unit を参照してください。。
Note 5: Precautions for Replacement of the Mecha Device
As Mecha Device may be damaged by static electricity from
its structure, handle it carefully like for the MOS IC.
its structure, handle it carefully like for the MOS IC.
In addition, ensure that the receiver is not covered with
dusts nor exposed to strong light.
dusts nor exposed to strong light.
Note 5: Mecha Device 交換時の注意
Mecha Device は構造上，静電気により破壊される恐れがあ
るため，MOS ICと同様に注意して取り扱ってください。
また，受光部にはゴミの付着，および強い光がはいることの
ないように注意してください。
#230
Back View
Note 6: The Mecha Device (SERVICE) includes a protective BODY
CAP.
This part is supplied only with the Mecha Device (SER-
VICE).
VICE).
Note 6: Mecha Device (SERVICE)には保護用のボディキャップが含
まれます。
この部品はサービス用キャビフロント組立のみに付属されま
す。
Note 7: Refer to “Assembly-6: Apply grease on the MB N Plate SP”
when you assemble.
Note 7: 組立時は Assembly-6: Apply grease on the MB N Plate
SP を参照してください。
Note
152
153
(Note 2, 3)
154
(Note 2, 3)
155
(Note 2, 3)
2
156
(Note 4)
157
164
165
166
(Note 6)
158
160
161
162
159
1
ns
(Note 1)
Imager Unit Section
(See page 2-8)
151
(Note 5)
#9
#64
#230
#9
ns
163
(Note 7)
Click on the first or last page to see other ILCE-5000L / ILCE-5000Y (serv.man2) service manuals if exist.