Read Sony ILCE-3000K Service Manual online
LEVEL
2
ILCE-3000K_L2
Sony Corporation
SUPPLEMENT-1
File this supplement with the service manual.
• Revision of EXPLODED VIEWS.
• Addition of ASSEMBLY.
• Addition of ASSEMBLY.
(13-086)
SERVICE MANUAL
Ver. 1.1 2013.09
2013I08-1
© 2013.09
Published by Sony Techno Create Corporation
Addition of ASSEMBLY
Change of ST Assy (771) and addition of Assembly
In this Supplement-1, change of the ST Assy (771) and the corresponding processing are added to the Assembly
for guidance.
In addition, change of arrangement of the ST harness is also added to the Assembly for guidance.
In this Supplement-1, change of the ST Assy (771) and the corresponding processing are added to the Assembly
for guidance.
In addition, change of arrangement of the ST harness is also added to the Assembly for guidance.
2. REPAIR PARTS LIST
2-1. EXPLODED VIEWS
2-1-3. ST SECTION
-
: Points changed portion
&
: Points added portion
Page
Former
New
2-5
ns: not supplied
#12
Bosses
#12
#12
ns
#12
A
2
105
110
1
,
2
-1,
2
-2,
2
-3
112
(Orange)
111
(Pink)
113
(White)
107
108
MIC901
C901
ns: not supplied
#12
Bosses
#12
#12
ns
#12
A
(Note 3)
2
105
110
1,2-1,2-2,
2-3
112
(Orange)
111
(Pink)
113
(White)
107
108
MIC901
C901
Ref. No.
Part No.
Description
105 X-2587-853-1 ST
ASSY
(771)
Ref. No.
Part No.
Description
105
X-2587-853-2
ST ASSY (771) (Note 3)
=
_
US Model
Canadian Model
AEP Model
UK Model
Russian Model
E Model
Australian Model
Chinese Model
Korea Model
Brazilian Model
Tourist Model
9-834-741-81
ILCE-3000K
Note 3: Refer to “Assembly-9: Notes on Assembling the
ST ASSY” when assembling.
ILCE-3000K_L2
– 2 –
3. ASSEMBLY
3-1. ASSEMBLY
-
: Points changed portion
Page
Former
New
3-1
Pass the harnesses to these claws.
Harness (SK-1001) (Pink)
Harness (SK-1003) (Orange)
Harness (SK-1002) (White)
Pass the harnesses to these claws.
Form the harnesses as shown below
with tweezers or the like.
with tweezers or the like.
Harness (SK-1001) (Pink)
Harness (SK-1003) (Orange)
Harness (SK-1002) (White)
ILCE-3000K_L2
– 3 –
&
: Points added portion
Page
Former
New
3-2
Assembly-9:
Notes on Assembling the ST ASSY
Cover ST (771)
Rib A
Rib A
NG
OK
Rib B
Suffix-1 and suffix-2 of part number exist in the ST Assy
(771).
Check whether the Rib A of the Cover ST (771) contained
in the part of part number suffix-1 is cut.
If the Rib A is not cut, cut it as shown below.
(771).
Check whether the Rib A of the Cover ST (771) contained
in the part of part number suffix-1 is cut.
If the Rib A is not cut, cut it as shown below.
Insert a nipper in the direction of arrow and cut
the Rib A of the Cover ST (771). (Rib B need not be cut.)
the Rib A of the Cover ST (771). (Rib B need not be cut.)
Confirm that cut surface of the Rib A does not protrude
out of portion A.
out of portion A.
After that, draw a circle with a permanent marker as below.
Size and color are arbitrary.
Size and color are arbitrary.
Nipper
Cut surface of the Rib A
Portion A
Circle
&
: Points added portion
Page
Former
New
3-2
Cushion (ST) (771)
ST Assy (771)
Cushion (ST)(771) is stuck to the part of part number suffix-1
of the ST Assy (771).
Remove the cushion (ST)(771) so that no adhesive remains.
This work is not necessary for the part of part number suffix-2
of the ST Assy (771).
of the ST Assy (771).
Remove the cushion (ST)(771) so that no adhesive remains.
This work is not necessary for the part of part number suffix-2
of the ST Assy (771).
After that, draw a circle with a permanent marker as below.
Size and color are arbitrary.
Size and color are arbitrary.
Circle
