ILCE-3000K, ILCE-3500J (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 11

Read Sony ILCE-3000K / ILCE-3500J (serv.man2) Service Manual online

ILCE-3000K/3500J_L2
2-7
2-1-5. IMAGER UNIT SECTION
ns: not supplied
Ref. No. 
Part No. 
Description
  201 
4-281-914-01 
IM SPACER (869) 
 202 
4-281-915-01  IM 
GS 
TAPE 
  203 
1-856-482-11 
FILTER BLOCK, OPTICAL (Note)
 #191  4-188-735-01  SCREW 
(M1.7) 
Screw
Note
Note :
J-6082-737-A
Refer to the following statements when replacing the Optical 
filter block.
Method of Removal
(1) Pour resolvent (alcohol or cleaning agent) between the 
imager and the IM spacer.
*
 Wait for that the adhesive power of the IM spacer 
weakens.
(2) Remove the IM spacer from the imager.
Method of Attachment
(1) Attach the IM GS tape and the Optical filter block by 
aligning them with the outer shape of the IM spacer 
evenly.
*
 The two-layer side of the Optical filter block is on the 
imager side.
(2) Set the Optical filter block in its attachment jig
      (J-6082-737-A), with the attached adhesive side of IM  
spacer facing upward.
(3) Press the imager down into the jig as shown below to 
attach it to the Optical filter block.
Imager
Peel off the released paper.
Pour resolvent (alcohol or cleaning agent) 
between the imager and the IM spacer.
The two-layer 
side is on the 
imager side.
Mount 
Side
Imager 
Side
Optical Filter Block
Peel off the 
released paper.
Peel off the 
released paper.
Peel off the 
released paper.
IM GS Tape
IM Spacer
#191: M1.7 X 3.5
(Black)
4-188-735-01
3.5
1.7
201
202
203
(Note)
ns
ns
#191
(All mounted parts and IS-1007 complete board are not supplied,
but they are included in Mecha Device (1100) (Service).)
Page of 16
Display

Click on the first or last page to see other ILCE-3000K / ILCE-3500J (serv.man2) service manuals if exist.