Read Sony DSLR-A700 / DSLR-A700H / DSLR-A700K Service Manual online
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
(ENGLISH)
For the DSLR-A700 adjustment, the “Adjust Base System for DSLR” is required in addi-
tion to the adjustment module.
To use the adjustment module, it must be installed in the Adjust Base System for DSLR.
Note that the module cannot be used independently.
tion to the adjustment module.
To use the adjustment module, it must be installed in the Adjust Base System for DSLR.
Note that the module cannot be used independently.
Installing the Adjust base for DSLR (Version 1.0.0.1 or later):
1. Extract the file compressed in the ZIP format (Adjust-base_DSLR_Ver_10
1. Extract the file compressed in the ZIP format (Adjust-base_DSLR_Ver_10
[][]
.zip).
Execute the extracted file (AdjustBaseForDSLR_Ver_10
[][]
_setup.exe), and the installer will start.
2. [Setup - Adjust base for DSLR] screen will appear, and then click [Next]. (Fig. 1)
Ver. 1.7 2009.0
4
9-852-212-58
2009
D
0500-1
© 2009.
4
Published by Kohda TEC
DSLR-A700_ADJ
DSLR-A700
RMT-DSLR1
Fig. 1
3. Select the destination location and click [Next]. (Fig. 2)
Fig. 2
— 2 —
DSLR-A700_ADJ
4. Click [Next]. To create a shortcut icon on the desktop, give a check mark to [Create a desktop icon]. (Fig. 3)
Fig. 3
5. Confirm the destination location where the Adjust base for DSLR is installed, and then click [Install]. (Fig. 4)
Fig. 4
6. Check the contents of application to be updated, and click [Next]. (Fig. 5)
Fig. 5
— 3 —
DSLR-A700_ADJ
7. To start the application after installation completed, give a check mark to [Launch Adjust base for DSLR]. Click [Finish],
and the installation will be complete. (Fig. 6)
Fig. 6
Installing the Adjustment Module:
1. Extract the module data for DSLR-A700 (DSLR-A700_Ver_10
1. Extract the module data for DSLR-A700 (DSLR-A700_Ver_10
[][]
.zip).
2. Start the Adjust Base System for DSLR.
If it has already started, terminate all tests and release the connection.
3. From the [File] menu, select [Open Module Folder]. (Fig. 7)
Fig. 7
4. The module folder will be displayed with the Explorer. If there is a module of outdated version, drag it to the Recycle Bin
to delete it. (Fig. 8)
Fig. 8
— 4 —
DSLR-A700_ADJ
5. Copy the extracted module to the module folder. (Fig. 9)
Fig. 9
6. Return to the Adjust Base System for DSLR, and select [Update Model Menu] from the [File] menu. (Fig. 10)
Fig. 10
7. [MODEL] menu will be opened, and then select the installed model. (Fig. 11)
Fig. 11
8. Check the refreshed information.
Thus, the adjustment module is ready for use.
Note:
To install the module, be sure to follow the procedure given above.
Installation not following the procedure may cause an error.
Installation not following the procedure may cause an error.