Read Sony DSLR-A450 / DSLR-A450L / DSLR-A450Y Service Manual online
DSLR-A450/A450L/A450Y_L2
2-8
2-1-6. ANTI SHAKE UNIT SECTION
ns: not supplied
Screw
IDENTIFYING PARTS
ASSEMBLY
#64: M1.7 X 5.0 (Tapping)
(Silver)
2-666-551-21
2-666-551-21
5.0
1.7
302
303
307
308
309
301
(including HOL-006 flexible board)
304
(including IC4205 (CMOS imager) and
IS-060 complete board)
(Note 1, 2, 3)
IS-060 complete board)
(Note 1, 2, 3)
305
(Note 3)
306
(Note 3)
ns
ns
#64
#64
Note
Note 2: Refer to “3-3. CLEANING PROCEDURE OF OLPF”
on page 3-7 for method of cleaning the OLPF.
Note 1:
Precautions for Replacement of Imager
• If the imager has been replaced, carry out all the adjustments
Precautions for Replacement of Imager
• If the imager has been replaced, carry out all the adjustments
for the camera section.
• As the imager may be damaged by static electricity from its
structure, handle it carefully like for the MOS IC.
In addition, ensure that the receiver is not covered with dusts
nor exposed to strong light.
Note 3: Refer to below when replacing the optical filter block.
Disassembly
1. Pour the solvent (alcohol or cleaning liquid) between
1. Pour the solvent (alcohol or cleaning liquid) between
the imager and the spacer.
∗ Wait for the adhesive power of the adhesive tape to
weaken.
2. Remove the spacer from the imager.
Assembly
1. Paste the optical filter block so that an upper, lower,
1. Paste the optical filter block so that an upper, lower,
right and left may become uniform for the spacer.
∗ Replace the new one without reusing the spacer.
∗ Refer to the figure below for the direction that the
optical filter block installs.
2. Paste the spacer so that an upper, lower, right and
left may become uniform for the imager.
Pour the solvent
(alcohol or cleaning liquid).
(alcohol or cleaning liquid).
Optical Filter Block
Spacer
Imager
Imager
Imager
Side
Side
Mount
Side
Side
Optical Filter Block
Spacer
Peel off eleased paper.
Peel off eleased paper.
Two layers are
imager side.
imager side.
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
301
A-1741-366-A SLIDER UNIT (857 SERVICE) (including HOL-006
flexible board)
302
3-283-501-01
PLATE, LOWPASS, RETAINER
303
3-273-746-01
SHEET, LOWPASS FILTER MASK
304
A-1736-424-A UNIT, OMEGA (858) (including IC4205 (CMOS imager)
and IS-060 complete board) (Note 1, 2, 3)
305
1-788-639-11
OPTICAL FILTER BLOCK (OFB-01-04) (Note 3)
306
A-1736-609-A PLATE ASSY, SPACER (858) (Note 3)
307
1-880-440-11
IS-049 FLEXIBLE BOARD
308
1-880-442-11
IS-051 FLEXIBLE BOARD
309
3-268-998-01
PLATE FPC GUIDE
#64
2-666-551-21 SCREW,
TAPPING,
P2
Click on the first or last page to see other DSLR-A450 / DSLR-A450L / DSLR-A450Y service manuals if exist.