Read Sony DSLR-A390K Service Manual online
Sony Corporation
Revision History
DSLR-A390K_ADJ
Auto-ADJ
983453551.pdf
2010H29-1
© 2010.08
Published by Sony Techno Create Corporation
Ver. 1.0 2010.08
9-834-535-51
DSLR-A390K
For the DSLR-A390K adjustment, the “Adjust Base System for DSLR” is required in addition to the adjustment
module.
To use the adjustment module, it must be installed in the Adjust Base System for DSLR.
Note that the module cannot be used independently.
For details of installing the Adjust base for DSLR and the Adjustment Module, refer to Service Manual ADJ of
DSLR-A700.
module.
To use the adjustment module, it must be installed in the Adjust Base System for DSLR.
Note that the module cannot be used independently.
For details of installing the Adjust base for DSLR and the Adjustment Module, refer to Service Manual ADJ of
DSLR-A700.
Installing the Adjustment Module:
1. Extract the module data for DSLR-A390K (DSLR-A390_Ver_10[][].zip).
2. Start the Adjust Base System for DSLR.
If it has already started, terminate all tests and release the connection.
3. From the [File] menu, select [Open Module Folder].
4. The module folder will be displayed with the Explorer. If there is a module of outdated version, drag it to the Recycle Bin to delete it.
5. Copy the extracted module to the module folder.
6. Return to the Adjust Base System for DSLR, and select [Update Model Menu] from the [File] menu.
7. [MODEL] menu will be opened, and then select the installed model.
8. Check the refreshed information.
Thus, the adjustment module is ready for use.
Note: To install the module, be sure to follow the procedure given above.
Installation not following the procedure may cause an error.
1. Extract the module data for DSLR-A390K (DSLR-A390_Ver_10[][].zip).
2. Start the Adjust Base System for DSLR.
If it has already started, terminate all tests and release the connection.
3. From the [File] menu, select [Open Module Folder].
4. The module folder will be displayed with the Explorer. If there is a module of outdated version, drag it to the Recycle Bin to delete it.
5. Copy the extracted module to the module folder.
6. Return to the Adjust Base System for DSLR, and select [Update Model Menu] from the [File] menu.
7. [MODEL] menu will be opened, and then select the installed model.
8. Check the refreshed information.
Thus, the adjustment module is ready for use.
Note: To install the module, be sure to follow the procedure given above.
Installation not following the procedure may cause an error.
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2010.08
Official Release
—
—
DSLR-A390K_ADJ
– 2 –
[ Digital Zoom Check Chart ]
Print the digital zoom check chart in 100%
size without reduction or enlargement.
Display