Read Sony DSLR-A230 / DSLR-A330 / DSLR-A380 Service Manual online
DSLR-A230/A330/A380_L2
3-6
#5: M1.7 X 3.5 (Tapping)
(Black)
3-080-204-01
3-080-204-01
3.5
1.7
#5: M1.7 X 3.5 (Tapping)
(Black)
3-080-204-01
3-080-204-01
3.5
1.7
#12: M1.7 X 5.0 (Tapping)
(Black)
3-080-204-21
3-080-204-21
1.7
5.0
#12: M1.7 X 5.0 (Tapping)
(Black)
3-080-204-21
3-080-204-21
1.7
5.0
A
Do not twist the ST harness on the route of figure below.
∗ It is assumed to be "Twist" that any of the harness coils around
∗ It is assumed to be "Twist" that any of the harness coils around
other harness once or more.
Do in the state of Pop-up when you install the ST Case U.
∗ To maintain the state of the harness as shown in figure below.
∗ To maintain the state of the harness as shown in figure below.
A
6-7. Harness Arrangement
6-10. Harness Arrangement
6-13. SH Flexible Spacer (A330/A380)
6-14. Plunger Solenoid
Plunger Solenoid
Soldering
SH Flexible Spacer
SH-032 Flexible Board
6-8. ST Pop Up Arm Cover
6-11. ST Pop Up Arm Cover
ST Pop Up Arm Cover
Ditch
Boss
6-9. ST Case U
6-12. Shoe Connector
Shoe Connector
ST Case U
ST Pop Up Arm Cover
Screw
Claw
Put away the harness internally.
Rib
Rib
Rib
Pass it through the hole.
Fkash Unit
Marking B
Pass it through the hole.
Pass it through the hole.
Pass it through the hole.
Screw
Screw
6-15. Put the Crease
6-16. SH-032 Flexible Board
Install the shoe connector flexible board.
Valley fold
Valley fold
Screw
Ditch
Black
Black
Pink
The harness must not exceed
the rib (mount side).
the rib (mount side).
Mount Side
Pink
White
White
Attention points
Black
Pink
Be in the range that the Marking A
showed in figure.
showed in figure.
There is a fold habit that the
Marking B becomes the top
in the state of Pop-up.
Marking B becomes the top
in the state of Pop-up.
∗ A < 90°
Marking A
∗ A < 90°
Click on the first or last page to see other DSLR-A230 / DSLR-A330 / DSLR-A380 service manuals if exist.