Read Sony DSLR-A100 (serv.man4) Service Manual online
— 14 —
DSLR-A100_L2
1-8. METHOD OF CAPACITOR HARNESS PROCESSING
Setting Procedure
If you set the upper cabinet unit again, don't put the harness between the screw of upper cover unit and metal part of main chassis, please.
If you set the upper cabinet unit again, don't put the harness between the screw of upper cover unit and metal part of main chassis, please.
1.
Don't bundle four harness together and crawl harness on the wall.
Note 1:
Don't bundle the each
harness together.
Don't bundle the each
harness together.
Paste point:
Put the orange harness
to point.
Put the orange harness
to point.
Paste angle:
Paste angle of the harness it
within 30-degree.
Paste angle of the harness it
within 30-degree.
2.
Fix the harness by POLYESTER TAPE (9-913-210-00) not to bundle together.
Regarding POLYESTER TAPE: 9-913-210-00 (9 mm width), cut to 15 mm
Regarding POLYESTER TAPE: 9-913-210-00 (9 mm width), cut to 15 mm
× 5 mm and paste, please.
Note 2 :
Don't side drop the tape.
Don't side drop the tape.
Polyester Tape (15 mm x 5 mm)
Note 3:
Don't put the harness in the chassis.
Don't put the harness in the chassis.
Note 4:
Not to pull the harness strongly.
Not to pull the harness strongly.
3.
Set the upper cover unit to the unit.
Click on the first or last page to see other DSLR-A100 (serv.man4) service manuals if exist.