DSLR-A100, DSLR-A100H, DSLR-A100K, DSLR-A100W - Sony Digital Camera Service Manual (repair manual)

Model
DSLR-A100 DSLR-A100H DSLR-A100K DSLR-A100W
Pages
122
Size
14.38 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dslr-a100-dslr-a100h-dslr-a100k-dslr-a100w.pdf
Date

View Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W Service Manual online

SERVICE MANUAL
LEVEL
 
2
Link
DISASSEMBLY
SERVICE NOTE
SPECIFICATIONS
SCHEMATIC DIAGRAMS
FRAME SCHEMATIC DIAGRAM
BLOCK DIAGRAMS
REPAIR PARTS LIST
PRINTED WIRING BOARDS
Link
Revision History
Revision History
How to use
Acrobat Reader
How to use
Acrobat Reader
Sony EMCS Co.
DSLR-A100_L2
Ver. 1.6  2008.09
DIGITAL SINGLE LENS REFLEX CAMERA
2008I0500-1
  © 2008.9
Published by Kohda TEC
9-852-130-33
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Japanese Model
Tourist Model
The components identified by
mark  0  or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque  0  sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DSLR-A100
Revised-2
Replace the previously issued
SERVICE MANUAL 9-852-130-32
with this manual.
— 2 —
DSLR-A100_L2
SPECIFICATIONS
Camera
[System]
Camera Type
Digital Single Lens Reflex 
Camera with built-in flash and 
interchangeable lenses
Lens
All of Sony Lens
[CCD]
Total pixel number of camera
Approx. 10 800 000 pixels
Effective pixel number of camera
Approx. 10 200 000 pixels
Image sensor
23.6 
× 15.8mm (APS-C format) 
Interlace scan Primary Color
[Super SteadyShot]
System
CCD-Shift mechanism
Super SteadyShot Compensation capability
Approximately 2 EV to 3.5 EV
decrease in shutter speed 
(varies according to shooting 
conditions and lens used)
[Anti-Dust]
System
Charge protection coating on 
Low-Pass Filter and CCD-Shift 
mechanism
[Viewfinder]
Type
Fixed eye-level system with 
roof mirror type pentaprism
Focusing Screen Spherical Acute Matte
Field of View
0.95
Magnification
0.83 
× with 50 mm lens at 
infinity, –1 m
–1
Eye Relief
Approximately 20mm from the 
eyepiece, 16mm from the 
eyepiece frame at –1 diopter 
(–1m
–1
)
Dioptor Adjustment
–2.5 to +1.0 m
–1
[Auto Focus System]
System
TTL phase-detection system, 
CCD line sensors (9 points, 8 
lines with center cross-hair 
sensor)
Sensitivity Range
0 EV to 18 EV (at ISO 100 
equivalent)
[Exposure]
Metering Cell
40-segment honeycomb-pattern 
SPC
Metering Range +1 EV to +20 EV (+4 EV to 
+20 EV with Spot metering), 
(at ISO 100 with F1.4 lens)
[Shutter]
Type
Electronically-controlled, 
vertical-traverse, focal-plane 
type
Speed range
1/4000 second to 30 seconds, 
bulb
Flash Sync Speed
1/160 second (with Super 
SteadyShot off),
1/125 second (with Super 
SteadyShot on)
[Built-In-Flash]
Flash G.No.
GN 12 (in meters at ISO 100)
Recycling Time
Approx. 3 seconds
[Recording media]
CompactFlash card(TypeI,II),  
Microdrive,  “Memory Stick 
Duo” (with Memory Stick Duo 
Adaptor for CF Slot)
[LCD monitor]
LCD panel
6.2 cm (2.5type) TFT drive
Total number of dots
230 000 (960
×240) dots
[Power, general]
Used battery pack
Rechargeable battery pack 
NP-FM55H
[Others]
PictBridge
Compatible
Exif Print
Compatible
PRINT Image Matching III
Compatible
Dimensions
133.1 
× 94.7 × 71.3 mm
(5 1/4 
× 3 3/4 × 2 7/8 inches)
(W/H/D, excluding protrusions)
Mass
Approx.545 g (1 lb 3.2 oz)  
(without batteries, recording 
medium and body accessories)
Operating temperature
0 to +40
°C (+32 to +104°F)
(When using the Microdrive: 
+5 to +40
°C (41 to +104°F))
Exif
Exif Ver. 2.21
USB communication
Hi-Speed USB (USB 2.0 
compliant)
BC-VM10 Battery charger
Input rating
100 V to 240 V AC, 50/60 Hz
Output rating
 8.4 V DC, 750 mA
Operating temperature range
0 to +40
°C (32 to +104°F)
Storage temperature range
-20 to +60
°C (-4 to +140°F)
Maximum dimensions
Approx. 70 
× 25 × 95 mm
(2 7/8 
× 1× 3 3/4 inches) (W/H/
D)
Mass
Approx. 90 g (3.2 oz)
Rechargeable battery pack NP-FM55H
Used battery
Lithium-ion battery
Maximum voltage 
DC 8.4 V 
Nominal voltage  DC 7.2 V
Capacity 
11.5 Wh (1 600 mAh)
Maximum dimensions
Approx. 38.2 
× 20.5 × 55.6 mm 
(1 9/16 
× 13/16 × 2 1/4 inches) 
(W/H/D)
Mass
Approx. 78 g (2.8 oz)
Design and specifications are subject to change 
without notice.
— 3 —
DSLR-A100_L2
TABLE OF CONTENTS
1.
SERVICE NOTE
1-1.
Chemicals ········································································ 1-1
1-2.
Exterior Parts ··································································· 1-1
1-3.
Unleaded Solder ······························································ 1-1
1-4.
Safety Check-out ····························································· 1-1
1-5.
Note for Replacing Fuse on the AM-001 Board ·············· 1-2
1-6.
Demagnetization Method ················································ 1-2
2.
DISASSEMBLY
2-1.
Disassembly ····································································· 2-2
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram (1/4) ··········································· 3-1
3-2.
Overall Block Diagram (2/4) ··········································· 3-2
3-3.
Overall Block Diagram (3/4) ··········································· 3-3
3-4.
Overall Block Diagram (4/4) ··········································· 3-4
3-5.
Power Block Diagram (1/3) ············································· 3-5
3-6.
Power Block Diagram (2/3) ············································· 3-6
3-7.
Power Block Diagram (3/3) ············································· 3-7
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagram ·············································· 4-1
4-2.
Schematic Diagrams ························································ 4-3
4-3.
Printed Wiring Boards ··················································· 4-23
5.
REPAIR  PARTS  LIST
5-1.
Exploded Views ······························································· 5-2
Section
Title
Page
1-1
DSLR-A100_L2
1. SERVICE NOTE
1-1. CHEMICALS
Some chemicals used for servicing are highly volatile.
Their evaporation caused by improper management affects your health and environment, and wastes resources.
Manage the chemicals carefully as follows.
Store chemicals sealed in a specific place to prevent from exposure to high temperature or direct sunlight.
Avoid dividing chemicals into excessive numbers of small containers to reduce natural evaporation.
Keep containers sealed to avoid natural evaporation when chemicals are not in use.
Avoid using chemicals as much as possible. When using chemicals, divide only required amount to a small plate from the container and
use up it.
1-2. EXTERIOR  PARTS
Be careful to the following points for plastic parts used in this unit.
Use a piece of cleaning paper or cleaning cloth for cleaning plastic parts. Avoid using chemicals.
Even if you have to use chemicals to clean heavy dirt, don’t use paint thinner, ketone, nor alcohol.
Insert the specific screws vertically to the part when installing a plastic part.
Be careful not to tighten screws too much.
1-3. UNLEADED SOLDER
This unit uses unleaded solder.
Boards requiring use of unleaded solder are printed with the lead free mark (LF) indicating the solder contains no lead.
(
Caution:
 Some printed circuit boards may not come printed with the lead free mark due to their particular size.)
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
Set the soldering iron tip temperature to 350 
°C approximately.
If cannot control temperature, solder/unsolder at high temperature for a short time.
Caution:
The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful!
Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur
such as on IC pins, etc.
Be sure to control soldering iron tips used for unleaded solder and those for leaded solder so they are managed separately. Mixing
unleaded solder and leaded solder will cause detachment phenomenon.
1-4. SAFETY  CHECK-OUT
After correcting the original service problem, perform the following safety checks before releasing the set to the customer.
1.
Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and
bridges.
2.
Check the interboard wiring to ensure that no wires are “pinched” or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their
replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
Keep the temperature of the soldering iron around 270 
°C during repairing.
Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering or unsoldering.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

Download Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W Service Manual (Repair Manual)

Here you can view online and download Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W Service Manual in PDF. DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.