DSC-WX350 - Sony Digital Camera Service Manual (repair manual). Page 38

DSC-WX350

4-17

8.  Set the gear of the Drive Gear Barrel at a position where the gear is shifted by about 1.5 teeth in the direction of arrow A from the rounded 

cutout of the Linear Cam Barrel.

9.  While inserting the eight bosses of the Core unit_2 into the eight grooves of the Linear Cam Barrel and the Drive Gear Barrel, install the 

Core unit_2 to the Linear Cam Barrel and the Drive Gear Barrel.

 

Linear Cam Barrel,
Drive Gear Barrel

Core unit_2

Bosses

Grooves

Flexible
Board

Rounded
cutout

A

Rounded cutout

Gear

1.5 teeth

10. While inserting the six bosses of the Core unit_1 into the six grooves of the Fixed Barrel, install the Core unit_1 to the Fixed Barrel.

 

Fixed Barrel

Bosses

Grooves

Core unit_1

Hole of the Fixed Barrel for passing
the Flexible Board

11.  Push the Linear Cam Barrel to protrude it to the object side so that the Drive Gear Barrel can be held.
12. Pull down the Drive Gear Barrel to the maximum.
13. Turn the Drive Gear Barrel clockwise to the maximum.

 

Drive Gear Barrel

Object side

Linear Cam Barrel