Read Sony DSC-WX350 Service Manual online
DSC-WX350
4-8
4-4. LENS BLOCK
4-4-1. Removal and Installation
(1) Barrier Base Replacing Method
Removal
1. Turn on the power and pull out the lens to set it in the TELE end state.
2. Remove the battery.
3. Pour a solvent such as alcohol to two gaps A of the Ornamental Ring A with tweezers or a fine-tipped stick as shown below.
4. Heat the Ornamental Ring A with a drier.
5. Repeat steps 3 and 4, and then remove the Ornamental Ring A.
1. Turn on the power and pull out the lens to set it in the TELE end state.
2. Remove the battery.
3. Pour a solvent such as alcohol to two gaps A of the Ornamental Ring A with tweezers or a fine-tipped stick as shown below.
4. Heat the Ornamental Ring A with a drier.
5. Repeat steps 3 and 4, and then remove the Ornamental Ring A.
Ornamental Ring A
A
Tweezers
Drier
Solvent
6. Release the four claws to detach the Barrier Cover and the two Barrier Blade B, and then release one claw from each Torsion Spring to
detach the two Barrier Blade A.
Barrier Cover
Barrier Blade B
Barrier Blade A
Claws
Claws
Claw
7. Remove the two Torsion Springs and the Switching Ring Spring, and then release the two claws to detach the Barrier Base.
Barrier Base
Switching Ring Spring
Torsion Springs
Claws
Click on the first or last page to see other DSC-WX350 service manuals if exist.