DSC-WX350 - Sony Digital Camera Service Manual (repair manual). Page 13

Read Sony DSC-WX350 Service Manual online

DSC-WX350
2-2
2-1-3. Self-diagnosis Code Table
Self-diagnosis Code
Symptom/State
Correction
Repaired by:
Block 
Function
Detailed 
Code
C
1  3 0  1
The internal memory has experienced a media error.
Turn the power off and on again.
The internal memory has experienced a format error.
Turn the power off and on again.
Memory card is unformatted.
Format the memory card.
Memory card is broken.
Insert a new memory card.
Memory card type error
Insert a supported memory card.
The camera cannot read or write data on the memory 
card.
Turn the power off and on again, or taking out and 
inserting the memory card several times.
C
3  
0  
1
Trouble with hardware
Turn the power off and on again.
E
4  
1
0  
0
Abnormality of wireless LAN module or
host CPU.
Replace the SY-1031 board.
E
6  1 0  0
Difficult to adjust focus
(Cannot initialize focus)
Retry turn the power on by the power switch.
E
6  
1
1  
0
Zoom operations fault (Cannot initialize zoom lens.)
Retry turn the power on by the power switch.
E
6  
1
3  
0
Reset position detection error on the stepper iris ini-
tializing.
Turn the power off and on again.
E
6  
2
0  
2
Abnormality of IC for steadyshot.
Turn the power off and on again.
E
6  
2
1  
0
Lens initializing failure.
Turn the power off and on again.
E
6  
2
1  
1
Lens overheating (PITCH).
Turn the power off and on again.
E
6  
2
1  
2
Lens overheating (YAW).
Turn the power off and on again.
E
6  
2
2  
0
Abnormality of thermistor.
Turn the power off and on again.
E
9  
1
0  
1
Abnormality when flash is being charged.
Checking of flash unit or replacement of flash unit. 
(Note 1)
E
9  
2
0  
0
Battery / Dry cell distinction defect
Turn the power off and on again.
E
9  
4
0  
0
Internal memory fault
Turn the power off and on again.
E
9  
5
0  
0
GPS hardware error
Turn the power off and on again.
E
9  
5
0  
1
Acceleration sensor hardware error
Turn the power off and on again.
E
9  
5
0  
2
Electronic compass hardware error (GPS hardware 
error)
Turn the power off and on again.
Note 1: After repair, be sure to perform “3-5. PROCESS AFTER FIXING FLASH ERROR”.
Note 2: Functions of codes with * mark are not provided in this unit.
*
*
*
*
Page of 42
Display

Click on the first or last page to see other DSC-WX350 service manuals if exist.