Read Sony DSC-WX220 Service Manual online
DSC-WX220
3-3
3-4. DISCHARGING OF THE FLASH CAPACITOR
The charging capacitor for the flash has been charged at high voltage.
Therefore, there is a possibility of an electric shock if you directly handle this capacitor.
The high-voltage charge will not be discharged by simply turning off the unit’s power.
Make sure any remaining voltage is discharged by short-circuiting the flash capacitor with a Short Jig.
Therefore, there is a possibility of an electric shock if you directly handle this capacitor.
The high-voltage charge will not be discharged by simply turning off the unit’s power.
Make sure any remaining voltage is discharged by short-circuiting the flash capacitor with a Short Jig.
Preparing a Short Jig
Make a Short Jig by connecting a small clip to each lead of a resistor with a rated value of approximately 1 k
Ω/1 W.
In order to prevent an electric shock, wrap insulating tape completely around the resistor and its leads.
Resistor with a rated value of approximately 1 k
Ω/1 W (2CTV0Q
Wrap insulating tape completely around the resistor and its leads.
Small clip
Small clip
3-5. CHECKING THE Wi-Fi FUNCTION
Perform the following procedure to check the Wi-Fi function.
Required equipment: Windows personal computer with Wi-Fi interface
1. Turn on the power of the unit.
2. Press [MENU] button and select
2. Press [MENU] button and select
(Wireless)
→ [Ctrl w/ Smartphone] in the menu.
3. Press set button in the center of the control wheel to open the “Wi-Fi Standby” screen.
4. When preparation for Wi-Fi has been completed, the following screen opens and a password for Wi-Fi connection is displayed.
4. When preparation for Wi-Fi has been completed, the following screen opens and a password for Wi-Fi connection is displayed.
Ctrl w/ Smartphone
Operate smartphone to connect to
this device via Wi-Fi.
SSID
DIRECT-XXXX:DSC-XXXX
Password
XXXXXXXX
Device Name
DSC-XXXX
Wi-Fi
Cancel
5. Confirm on the personal computer that the unit is detected as a connectable wireless network.
6. To further confirm that the unit is connectable, connect the unit to the personal computer and select “Network and Internet”
6. To further confirm that the unit is connectable, connect the unit to the personal computer and select “Network and Internet”
→ “Manage
Wireless Networks” from Control Panel to open the network connection list. The unit is included in the list.
XXXX:DSC-XXXX
– ENGLISH –
Click on the first or last page to see other DSC-WX220 service manuals if exist.