Read Sony DSC-W90 (serv.man4) Service Manual online
6-10
DSC-W90_ADJ
4.
HD Station Modifying Procedure
The HD station must be modified to perform the “Component out (Y, Pb, Pr) level adjustment” in the “Video System Adjustment”.
Modify the HD station by the following steps.
Modify the HD station by the following steps.
1) Prepare the HD station and USB connector.
Part No.
HD station (Note)
A-1242-190-A
USB connector
1-794-962-11
Note:
You may purchase the commercially available CSS-HD1.
2) Disassemble the HD station in the numerical order given in the following figure to remove the Connector board.
Fig. 6-1-10
3) Mount the USB connector on the Connector board.
Fig. 6-1-11
3
Five screws
2
Two foot rubbers
4
Lower cabinet
6
Connector board/
Multi board
Multi board
5
Two screws
1
Pull the switch
Upper cabinet
Connector board
Mount the USB connector.
Click on the first or last page to see other DSC-W90 (serv.man4) service manuals if exist.