Read Sony DSC-W80 (serv.man2) Service Manual online
Revision History
Revision History
Sony EMCS Co.- Sony Brasil Ltda
DSC-W80_L2
MANUAL DE SERVIÇO
LEVEL
2
Link
NOTA DE SERVIÇO
TABELA DE INFORMAÇÃO DO MODELO
ESPECIFICAÇÕES
DIAGRAMAS ESQUEMÁTICOS DA ESTRUTURA
DIAGRAMAS EM BLOCO
DESMONTAGEM
PLACAS DE CIRCUITO IMPRESSO
LISTA DE PEÇAS PARA REPARO
DIAGRAMAS ESQUEMÁTICOS
Link
Instruções do
Acrobat Reader
Memória Interna
DA PLACA
Ver. 1.0 2007.03
2007C0500-1
© 2007.
5
Publicado por Product & Quality Div.
9-
890-092
-31
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DSC-W80
Foto
:
Prata
DIGITAL STILL CAMERA
Brazilian
Model
•
Precaução sobre reparo da placa
SY-173
— 2 —
DSC-W80_L2
ESPECIFICAÇÕES
Camera
[System]
Image device:
7.20 mm (1/2.5 type) color CCD,
Primary color filter
Primary color filter
Total pixel number of camera:
Approx. 7 410 000 pixels
Effective pixel number of camera:
Approx. 7 201 000 pixels
Lens: Carl Zeiss Vario-Tessar 3
× zoom lens f =
5.8 – 17.4 mm (35 – 105 mm when converted
to a 35 mm still camera) F2.8 – 5.2
to a 35 mm still camera) F2.8 – 5.2
Exposure control: Automatic exposure, Scene
Selection (7 modes)
White balance: Automatic, Daylight, Cloudy,
Fluorescent 1,2,3, Incandescent, Flash
File format (DCF compliant):
Still images: Exif Ver. 2.21 JPEG compliant,
DPOF compatible
Movies: MPEG1 compliant (Monaural)
DPOF compatible
Movies: MPEG1 compliant (Monaural)
Recording media: Internal Memory (approx.
31 MB), “Memory Stick Duo”
Flash:Flash range (ISO sensitivity
(Recommended exposure Index) set to Auto):
approx. 0.2 to 3.3 m (7 7/8 inches to 10 feet
10 inches) (W)/approx. 0.4 to 1.8 m (1 feet
3 3/4 inches to 5 feet 10 7/8 inches) (T)
approx. 0.2 to 3.3 m (7 7/8 inches to 10 feet
10 inches) (W)/approx. 0.4 to 1.8 m (1 feet
3 3/4 inches to 5 feet 10 7/8 inches) (T)
[Input and Output connectors]
Multi connector Video output
Audio output (Monaural)
USB communication
USB communication
USB communication: Hi-Speed USB (USB 2.0
compliant)
[LCD screen]
LCD panel: 6.2 cm (2.5 type) TFT drive
Total number of dots: 115 200 (480
Total number of dots: 115 200 (480
× 240) dots
[Power, general]
Power: Rechargeable battery pack NP-BG1, 3.6 V
AC-LS5K AC Adaptor (not supplied), 4.2 V
Power consumption (during shooting with the
LCD screen on):
1.1 W
Operating temperature: 0 to 40
°C (32 to 104°F)
Storage temperature: –20 to +60
°C (–4 to +140°F)
Dimensions: 91.0
× 58.0 × 22.9 mm (3 5/8 ×
2 3/8
× 29/32 inches) (W/H/D, excluding
protrusions)
Mass:
DSC-W80:
Approx. 155 g (5.5 oz) (including NP-
BG1 battery pack and strap, etc.)
BG1 battery pack and strap, etc.)
DSC-W85:
Approx. 166 g (5.9 oz) (including NP-
BG1 battery pack and strap, etc.)
BG1 battery pack and strap, etc.)
Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible
BC-CSG/BC-CSGB/BC-CSGC
battery charger
battery charger
Power requirements: AC 100 to 240 V, 50/60 Hz,
2 W (BC-CSG/BC-CSGC)/ 2.6 W (BC-
CSGB)
CSGB)
Output voltage: DC 4.2 V, 0.25 A
Operating temperature: 0 to 40
Operating temperature: 0 to 40
°C (32 to 104°F)
Storage temperature: – 20 to +60
°C (–4 to
+140
°F)
Dimensions: Approx. 62
× 24 × 91 mm (2 1/2 ×
31/32
× 3 5/8 inches) (W/H/D)
Mass: Approx. 75 g (2.7 oz)
Rechargeable battery pack NP-
BG1
BG1
Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Capacity: 3.4 Wh (960 mAh)
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Capacity: 3.4 Wh (960 mAh)
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DSC-W80_L2
Model
DSC-W80/Silver
DSC-W80/Black
DSC-W80/White
DSC-W80/Pink
DSC-W85/Silver
Destination
US, CND, AEP, UK,
US, CND, AEP,
US, CND, AEP,
US, CND, AEP,
CND, AEP, UK, E,
E, AUS, HK, CH,
UK, E, AUS, HK,
UK, E, AUS, HK,
UK, E, AUS, HK,
AUS, KR
KR, AR, BR, J, JE
CH, KR, JE
CH, KR, J, JE
CH, KR, J, JE
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
FLEXIBLE Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Replace only with the same or equivalent type.
Model information table
• Abbreviation
AR
: Argentine model
AUS : Australian model
BR
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
EE
EE
: East European model
HK : Hong Kong model
J
J
: Japanese model
JE
: Tourist model
KR
: Korea model
NE
: North European model
— 4 —
DSC-W80_L2
ÍNDICE
1.
NOTA DE SERVIÇO
1-1. PRECAUÇÃO EM SUBSTITUIR A PLACA SY-173 ···················· · · · · · · · · · · · · · · · · · · · · 1-1
1-2. FUNÇÃO DE AUTO DIAGNÓSTICO ··················································· · · · · · · · · · · · · · · · 1-1
1-3.
1-4. MÉTODO PARA COPIAR OU APAGAR OS DADOS DA MEMÓRIA INTERNA
1-2. FUNÇÃO DE AUTO DIAGNÓSTICO ··················································· · · · · · · · · · · · · · · · 1-1
1-3.
1-4. MÉTODO PARA COPIAR OU APAGAR OS DADOS DA MEMÓRIA INTERNA
PROCESSO APÓS O REPARO DO ERRO DO FLASH ··············································1-2
MEMÓRIA ······················································································································1-3
1-5. COMO ESCREVER DADOS NA MEMORIA INTERNA ·························· · · · · · · · · · · · 1-4
2.
DESMONTEGEM
2-1. IDENTIFICANDO AS PEÇAS ······················································································ 2-2
2-2. DESMONTEGEM····································································· · · · · · · · · · · · · · · · · · · · · · · · · · · 2-3
2-3. MÉTODO DA TROCA DA GRADE MONTADA ······················································ · 2-6
2-4. MÉTODO DA TROCA DA UNIDADE DO MOTOR DO ZOOM ···························· · · 2-8
2-2. DESMONTEGEM····································································· · · · · · · · · · · · · · · · · · · · · · · · · · · 2-3
2-3. MÉTODO DA TROCA DA GRADE MONTADA ······················································ · 2-6
2-4. MÉTODO DA TROCA DA UNIDADE DO MOTOR DO ZOOM ···························· · · 2-8
3.
DIAGRAMAS EM BLOCO
3-1. DIAGRAMA EM BLOCO GERAL (1/2) ··········································· · · · · · · · · · · · · · · · · · · · 3-1
3-2. DIAGRAMA EM BLOCO GERAL (2/2) ········································································ 3-2
3-3. DIAGRAMA EM BLOCO POWER (1/2) ········································································· 3-3
3-4. DIAGRAMA EM BLOCO POWER (2/2) ········································································· 3-4
3-2. DIAGRAMA EM BLOCO GERAL (2/2) ········································································ 3-2
3-3. DIAGRAMA EM BLOCO POWER (1/2) ········································································· 3-3
3-4. DIAGRAMA EM BLOCO POWER (2/2) ········································································· 3-4
4.
PLACAS DE CIRCUITO IMPRESSO E
DIAGRAMAS ESQUEMÁTICOS
DIAGRAMAS ESQUEMÁTICOS
4-1. DIAGRAMAS ESQUEMÁTICOS DA ESTRUTURA ·············································· · · 4-1
4-2. DIAGRAMAS ESQUEMÁTICOS ················································································· 4-3
4-3. PLACAS DE CIRCUITO IMPRESSO ··················································· · · · · · · · · · · · · · · · · · · 4-21
4-4. LOCALIZAÇÃO DAS PEÇAS MONTADAS ···························································· 4-31
4-2. DIAGRAMAS ESQUEMÁTICOS ················································································· 4-3
4-3. PLACAS DE CIRCUITO IMPRESSO ··················································· · · · · · · · · · · · · · · · · · · 4-21
4-4. LOCALIZAÇÃO DAS PEÇAS MONTADAS ···························································· 4-31
5.
LISTA DE PEÇAS PARA REPARO
5-1. VISTA EXPLODIDA ····································································································· 5-2
5-2. LISTA DE PEÇAS ELÉTRICAS ·················································································· 5-7
5-2. LISTA DE PEÇAS ELÉTRICAS ·················································································· 5-7
Section
Title
Page
