DSC-W80, DSC-W80HDPR, DSC-W85 (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 21

6-19

DSC-W80/W85_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. Composite Video Level Adj.
3. VIDEO OUT Level Check
4. Release of Data Setting during Video Adj.

[Adjusting method]
1) Click the [Start] button of the Composite Video Level Adj.
2) The Automatic Adjustment Program executes the “1. Data

Setting during Video Adj.”.

3) If “1. Data Setting during Video Adj.” completed successfully,

the following screen is displayed during the execution of “2.
Composite Video Level Adj.”. Using the [Up]/[Down] button
on the screen, adjust so that the sync level of the video signals
satisfies the specified value. After the adjustment, click the
[End] button in the screen.

4) If the [End] button is clicked, “3. VIDEO OUT Level Check”

will be executed. The following message and screen are dis-
played. Check that the sync signal level and burst level of the
video signals satisfies the specified value, and click the [OK]
button in the message.

5) If the [End] button is clicked, “2. Composite Video Level Adj.”

and  “4. Release of Data Setting during Video Adj.” will be
executed.

6) Upon successful completion of all item the Composite Video

Level Adjustment, the following message is displayed. Click
the [OK] button.