DSC-W80, DSC-W80HDPR, DSC-W85 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 19

2-7

DSC-W80/W85_L2

2

Ornamental ring (A)

1

Install the inner ring and the barrier block.

When installing the barrier block, the CAV No. must be located in the lower left position.

2

Secure the barrier block with two screws.
*

Tightening torque = 0.049 

±

 0.01N 

•

 m (0.5 

±

 0.1kgf 

•

 cm)

Check that the barrier feather of the barrier block is not opened slightly or half-closed.

Turn on and off the power to check the opening and closing of the barrier block with the camera 
in horizontal, up and down directions respectively.
Further, check the zoom motion.
Rotate the ornamental ring (A) lightly to check that it is not removed.

1

Affix two barrier tapes to the barrier block.

The barrier tape must not cover the boss of the barrier block.

2

Install the ornamental ring (A).

Barrier block

CAV No.

Barrier 
feather

Boss

1

Barrier tape

1

Barrier tape

1

Barrier block

1

Inner ring

2

Two screws