DSC-W670 - Sony Digital Camera Service Manual (repair manual). Page 12

DSC-W670

3-1

Assembly-1: Routing Method of the Microphone Lead Wire,  

AF Lead Wire and Speaker Lead Wire

Main Frame Assy

Speaker lead wire

Microphone lead wire

Main Frame Assy

AF lead wire

Microphone lead wire

Speaker lead wire

Assembly-2: Assembling Method of the BT Terminal

BT Terminal

Main Frame Assy

Soldering point

Main Board Assy

Insert the BT Terminal vertically into the holder of the 
Main Frame Assy.

2-1.

Attach the Main Board Assy to the Main Frame Assy, 
and solder the BT Terminal at three points shown below.

2-2.

Assembly-3: Routing Method of the Capacitor Lead Wire

Capacitor lead wire

Capacitor

Assembly-4: Installation Cautions of the LCD Cover Assy

Put the LCD Cover Assy on the Cabinet Rear Assy.

2

Cabinet Rear Assy

Panel Module

LCD Cover Assy

Release paper

Peel off the release paper of LCD Cover Assy.

1

LCD Cover Assy

LCD Cover Assy

LCD Cover Assy

Panel Module

Attach the Panel Module to the LCD Cover Assy.

3

Assembly-5: How to distinguish the side of Optical Filter Block 

facing to Lens Device.

• IR cut coating surface

  The red coating is reflected.

• The other surface
  The red coating is 
  not reflected.

• Side view
  The red belt
  is seen.

Lens Device side

Lens Device side

Hold it with tweezers or the like.

Optical Filter  Block  

The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block facing the IR cut coated side to the lens
device. Distinguish the IR cut coated side from the other by applying the
fluorescent light to the Optical Filter Block in the dark place (cut off the
outside light).