DSC-W670 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 4

DSC-W670_ADJ

5-4

Perform the this operation additionally when replacing Main board or Lens.

The numbers downward of two-dimensional
black and white symbols.
Read the value with using a magnifier,
and make a note as "Lens data code". 
e.g. 
+000+000-002-039

Side of Lens

 

Preparations: 
 

Uncompress the “W670_Write_Lens Code_v[][][].zip” in any place of the PC, then confirm that it includes the following items.

    

Write_LensCode_v[][][].exe

    

UI43Api.dll 

 

The USB Driver is sane as “5-3-12. Set Language Destination”. 

1)  Check that the camera is on the adjustment mode.
 

Connect the camera and the PC. 

2)  Double click the “Write_LensCode.exe” to start up the writing tool. 

 
 (Fig. 

3)  Input the “Lens data code”, then press the “Write” button. (Fig. 5-3-3)

 
 (Fig. 

4)  In case of the setting is finished normally, the setting completion indication appears on the screen. (Fig. 5-3-4)
 

The power of the camera turns off automatically.

 
 (Fig. 

Perform the this operation additionally when replacing Main board or Lens.

Preparations: 
 

Uncompress the “W670_Set_Default Gyro Value_v[][][].zip” in any place of the PC, then confirm that it includes the following items.

    

Set_DefaultGyro_v[][][].exe

    

UI43Api.dll 

The USB Driver is sane as “5-3-12. Set Language Destination”. 

1)  Check that the camera is on the adjustment mode.
 

Connect the camera and the PC. 

2)  Double click the “Set_DefaultGyro.exe” to start up the writing tool. (Fig. 5-3-5)
3)  Press the “Set Default ” button. 

 
 (Fig. 

4)  In case of the setting is finished normally, the setting completion indication appears on the screen. (Fig. 5-3-6)
 

The power of the camera turns off automatically.

 
 (Fig.