DSC-W55 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 27

Read Sony DSC-W55 (serv.man4) Service Manual online

6-25
DSC-W55_ADJ
5.
Data Save Error
Fig. 6-1-56
Symptom
data cannot be saved normally. (The data set-
ting during adjustment cannot be cancelled)
Cause
• Data writing to the flash memory failed.
• Connection is faulty.
• Power supply is not installed correctly.
Remedy
• On the SEUS Operation screen, [Set] the data
to the pages and addresses displayed in the
message, and [Save] them. (Cancel manually
the data setting during adjustment.)
• Check the connection.
• Install the power supply correctly.
1-6-2.
Precautions When an Error Occurred
The Automatic Adjustment Program sets the data for adjustment
before the adjustment starts. Accordingly, if the adjustment termi-
nates by an error, the data during the adjustment may be left in the
camera.
Note 1:
With this data left in the camera, the camera will not op-
erate normally.
In this case, the [Release Data Setting] button is displayed in “red”
on the screen as shown in Fig. 6-1-57, 58 and 59. Click the
[Release Data Setting] button to cancel the data setting. When the
data setting is cancelled, the button color becomes “white”.
Note 2:
When “Data Save Error” occurred,  the [Release Data Set-
ting] button is displayed in “white”.
To cancel the data setting, perform it on the SEUS Op-
eration screen. How to cancel the data setting is displayed
in the error message.
Video System Adjustment screen
Fig. 6-1-57
Camera System Adjustment screen
Fig. 6-1-58
LCD System Adjustment screen
Fig. 6-1-59
How to cancel the 
data setting during 
adjustment is 
display here.
Page of 32
Display

Click on the first or last page to see other DSC-W55 (serv.man4) service manuals if exist.