Read Sony DSC-W520 Service Manual online
DSC-W520
3-1
3. DISASSEMBLY/ASSEMBLY
COVER TAPE
The end-loop of
REAR LENS SPRING
REAR LENS SPRING
1. After the part replacement, make sure to check whether there is no focus blurring in the centre and four areas around the
centre of the image with the specified method described as below as 3.6. Various Checks.
2. If the symptom cannot be improved with this repair method, take the repair of LENS BLOCK ASSY replacement as usual.
1. Disconnect the soldered connection.
2. Remove the COVER TAPE.
3. Unhook the end-loop of REAR LENS SPRING.
3-1. Disassembling
Note
REAR RETAINER
4. Remove the two screws.
5. Remove the four screws.
6. Remove the REAR RETAINER.
Ver. 1.1 2013.07
Click on the first or last page to see other DSC-W520 service manuals if exist.