Read Sony DSC-W515PS Service Manual online
DSC-W515PS
1-2
1-3. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD
3
4
4
INSTALLATION
1
1
Note: The tape must not be wrinkled.
2
5
Ornamental Ring A
Barrier Assy
A
REMOVAL
1
1
Turn on the power switch and extend the lens.
2
Detach the battery.
3
Pour a solvent such as alcohol from two places A to the tweezers or a needle shown below into a gap of Ornamental Ring A.
4
Tweezers
Remove while turning the Ornamental Ring A right and left.
Solvent
Remove Barrier Assy by disengaging four claws.
Affix two Barrier Tapes to Barrier Assy.
With four claws fitted in position, install the Barrier Assy.
Barrier Tape
Barrier Tape
Peel off release papers of Barrier Tapes.
Install Ornamental Ring A and press it lightly.
Install Ornamental Ring A and press it lightly.
Barrier Tape
Ornamental Ring A
Barrier Assy
Claw
Claw
Claw
Claw
Barrier
Lever
Lever
Hole
Barrier Assy
1-4. OPTICAL STEPPING MOTOR (F1380) REPLACING METHOD
1
2
3
2
3
1
Solder the four locations.
2
3
INSTALLATION
* Tightening torque = 0.049 ± 0.01N•m (0.5 ± 0.1kgf•cm)
* Tightening torque = 0.049 ± 0.01N•m (0.5 ± 0.1kgf•cm)
Optical Stepping
Motor (F1380)
Motor (F1380)
Optical Stepping
Motor (F1380)
Motor (F1380)
Remove four screws, and remove the Rear Mirror Plate.
REMOVAL
Remove one screw.
Remove the four soldering, and remove the Optical Stepping Motor (F1380).
Remove the four soldering, and remove the Optical Stepping Motor (F1380).
Install the Optical Stepping Motor (F1380) with one screw.
Install the Rear Mirror Plate with the four screws in the order of numbers.
Screw
Solder
Screw
Solder
4
1
2
3
Screw
Screw
Screw
Screw
Rear Mirror Plate
Screw
Screw
Screw
Screw
Rear Mirror Plate
Click on the first or last page to see other DSC-W515PS service manuals if exist.