Read Sony DSC-W50 (serv.man9) Service Manual online
SERVICE MANUAL
Auto-ADJ
DSC-W50_ADJ
Ver. 1.2 2007.08
Sony EMCS Co.
9-876-936-85
2007H0500-1
© 2007.8
Published by Kohda TEC
SUPPLEMENT-2
File this supplement with the service manual.
(DI07-045)
• Change of Automatic Adjustment Program
• Addition of “DESTINATION DATA WRITE”
• Addition of Note for Flange Back Adjust-
• Addition of “DESTINATION DATA WRITE”
• Addition of Note for Flange Back Adjust-
ment Jig
• Change of Mode Dial Check
• Precaution on Replacing the SY-144 Board
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program has
been changed from Ver_1.0r01 into Ver_1.2r02.
been changed from Ver_1.0r01 into Ver_1.2r02.
: Points changed portion.
&
: Points added portion.
!
: Points deleted portion.
6-1. CAMERA SECTION ADJUSTMENTS
1-2.
ADJUSTMENT PROGRAMS
1-2-1.
Automatic Adjustment Program
(Service manual page 6-10)
2.
2.
Start of Automatic Adjustment Program
Double-click the application file (DSC-W50 Auto-Adj
Ver_1.2r02.exe), and the Automatic Adjustment Program will start.
Ver_1.2r02.exe), and the Automatic Adjustment Program will start.
Note:
[] (numeric value) of the file name varies depending on the
version of Automatic Adjustment Program.
version of Automatic Adjustment Program.
3.
Function of Each Button on Main Menu Screen
When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-9 will appear. On this screen, select each adjust-
ment section.
screen in Fig. 6-1-9 will appear. On this screen, select each adjust-
ment section.
Fig. 6-1-9
6
This part indicates the version of Automatic Adjustment Pro-
gram.
gram.
7
[DESTINATION DATA WRITE] button
The “DESTINATION DATA WRITE” screen appears.
The “DESTINATION DATA WRITE” screen appears.
1
6
7
2
3
4
5
&
DSC-W50
&
#
— 2 —
DSC-W50_ADJ
DESTINATION DATA WRITE
If this processing is executed, the SY-144 board is set to the fac-
tory default setting according to the specified destination.
Setting items:
• Font data for camera display
• Initial setting of display language
• VIDEO OUT Default Data
tory default setting according to the specified destination.
Setting items:
• Font data for camera display
• Initial setting of display language
• VIDEO OUT Default Data
1.
Function of Each Button on Destination Data Write
Screen
Screen
Click the [DESTINATION DATA WRITE] button on the Main Menu
screen, and the “DESTINATION DATA WRITE” screen in fol-
lowing figure will appear.
screen, and the “DESTINATION DATA WRITE” screen in fol-
lowing figure will appear.
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Destination List
Select the written destination
Select the written destination
3
[Data Write] button
Write the destination data to the camera.
Write the destination data to the camera.
4
[ ] button
Indicate the destination table.
Indicate the destination table.
5
[Procedure] button
Indicate the procedure.
Indicate the procedure.
?
• Addition of “DESTINATION DATA WRITE”
Precaution on Replacing the SY-144 Board
At first, execute “DESTINATION DATA WRITE” when the SY-144 board was replaced.
By executing this processing, “VIDEO OUT Default Data Check” and “Initial Language Data Check” on page 6-1 and page 6-2 of the
Service Manual is no longer necessary.
By executing this processing, “VIDEO OUT Default Data Check” and “Initial Language Data Check” on page 6-1 and page 6-2 of the
Service Manual is no longer necessary.
2.
Destination Data Write
[Writing method]
1) Prepare a Memory Stick formatted by a camera.
2) Copy all of the font data CX_FONT1.ash to CX_FONT4.ash
1) Prepare a Memory Stick formatted by a camera.
2) Copy all of the font data CX_FONT1.ash to CX_FONT4.ash
supplied with this program to the root directory of the Memory
Stick.
Stick.
3) Insert the Memory Stick in the set.
4) Select the target destination from the pulldown list.
4) Select the target destination from the pulldown list.
5) Click the [Data Write] button.
6) When the “Set the camera to PB mode” message is appeared,
confirm that the camera mode is PB. Then click the [OK] button
to continue the processing.
to continue the processing.
7) Following message will be appeared after completing data
writing.
8) Remove the Memory Stick from the set and disconnect the USB
cable.
9) Execute the Initialize operation using the Setup screen.
1
2
4
3
5
— 3 —
DSC-W50_ADJ
Japanese
English
French
German
Spanish
Italian
Portuguese
Simplified
Chinese
Traditional
Chinese
Arabic
Dutch
Russian
Swedish
Korean
Norwegian
Danish
Finnish
Polish
Hungarian
Czech
Persian
Thai
GP1
J1
J
z
NTSC
U2
US
z
a
a
a
a
a
NTSC
CA2
CND
z
a
a
a
a
a
NTSC
AU2
AUS
z
a
a
a
a
a
PAL
CEE2
a
a
a
a
a
a
a
z
a
a
a
a
a
a
a
PAL
CEE3
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEE4
a
a
a
z
a
a
a
a
a
a
a
a
a
a
a
PAL
CEE5
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEE6
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEE7
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEH
UK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
E15
z
a
a
a
a
a
a
a
a
PAL
E32
z
a
a
a
a
a
a
a
a
PAL
E33
a
z
a
a
a
a
a
a
a
NTSC
AR2
AR
a
z
a
a
a
a
a
a
a
NTSC
HK1
HK
z
a
a
a
a
a
a
a
a
PAL
CN1
CH
a
a
a
z
a
a
a
a
a
PAL
KR2
KR
a
a
a
a
a
a
z
a
a
NTSC
JE3
JE
z
a
a
a
a
a
a
a
a
PAL
GP4
E
VIDEO OUT
Default
GP2
GP3
AEP
LANGUAGE GP
DESTINATION
AREA
SELECTABLE LANGUAGE
&
: Points added portion.
: Points changed portion.
: Points changed portion.
1-4.
CAMERA SYSTEM ADJUSTMENTS
1-4-3.
Adjusting Method
1.
CAMERA Adjustment 1
(Service manual page 6-16)
Preparation of Flange Back Adj.
(Using the flange back adjustment jig)
(Luminance: about 300 lux)
(Using the flange back adjustment jig)
(Luminance: about 300 lux)
Note 3:
When using the flange back adjustment jig, take care of
the following points:
• For the illumination, use a light source such as an in-
the following points:
• For the illumination, use a light source such as an in-
candescent lamp or inverter type fluorescent light free
from flickering.
from flickering.
• Do not make an adjustment in the environment where
fluorescent lamp flickering occurs even if the illumi-
nance can be ensured with the room illumination only.
Use an incandescent lamp or inverter type fluorescent
light at a place free from the influence of room illumi-
nation.
nance can be ensured with the room illumination only.
Use an incandescent lamp or inverter type fluorescent
light at a place free from the influence of room illumi-
nation.
+
• Addition of Note for Flange Back Adjustment Jig
1) Install the flange back adjustment jig so that the distance be-
tween it and the front of lens of camera is less than 3 cm.
Note 4:
Take care not to hit the flange back adjustment jig
when extending the lens.
when extending the lens.
2) Make the height of flange back adjustment jig and the camera
equal.
3) Check that the center of chart meets the center of shot image
screen with the zoom lens at TELE end and WIDE end respec-
tively.
tively.
Fig. 6-1-20
Flange back adjustment jig
Below 3 cm
Camera
— 4 —
DSC-W50_ADJ
6-2. SERVICE MODE
: Points changed portion.
6.
Mode Dial Check
(Service manual page 6-29)
Page 20
Addresses A3, A4
Using method:
1) Select page: 20, addresses: A3 and A4.
2) By discriminating the read data, the state of the mode dial can be discriminated.
1) Select page: 20, addresses: A3 and A4.
2) By discriminating the read data, the state of the mode dial can be discriminated.
Address
Data
00 to 07
0D to 23
25 to 48
4B to 7D
81 to BD
FF
A3
Soft snap
MOVIE
AUTO
P_AUTO
MANUAL
(MODE DIAL0)
(Control SW
(Control SW
(Control SW
(Control SW
(Control SW
Others
(IC101 L22)
block)
block)
block)
block)
block)
A4
Landscape
Beach
Snow
Twilight portrait
Twilight
(MODE DIAL1)
(Control SW
(Control SW
(Control SW
(Control SW
(Control SW
Others
(IC101 L25 )
block)
block)
block)
block)
block)
• Change of Mode Dial Check
