Read Sony DSC-W360 / DSC-W560 (serv.man2) Service Manual online
DSC-W360_L2
1-4
1-6 . ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD
3
Peel off release papers of Barrier Tapes.
4
Install Ornamental Ring A and press it lightly.
Installation
1
1
Affix two Barrier Tapes to Barrier Assy.
Note: The tape must not be wrinkled.
Note: The tape must not be wrinkled.
2
With four claws fitted in position, install the Barrier Assy.
5
Remove Barrier Assy by disengaging four claws.
Ornamental Ring A
Barrier Assy
Barrier Tapes
Barrier Tape
Barrier Tape
A
Removal
1
1
Turn on the power switch and extend the lens.
2
Detach the battery.
3
Pour a solvent such as alcohol from two places A to the tweezers or a needle shown below into a gap of Ornamental Ring A.
4
Remove while turning the Ornamental Ring A right and left.
Solvent
Tweezers
Ornamental Ring A
Barrier Assy
Claws
Claws
Barrier Assy
Claws
Claws
Barrier
Lever
Lever
Hole
1-7 . OPTICAL STEPING MOTOR (F1380) REPLACING METHOD
Removal
1
1
Remove four screws, and remove the Rear Mirror Plate.
2
Remove one screw.
3
Remove the four soldering, and remove the Optical Steping Motor (F1380).
1
Solder the four locations.
2
Install the Optical Steping Motor (F1380) with one screw.
3
Install the Rear Mirror Plate with the four screws in the order of nambers.
Installation
* Tightening torque = 0.049
± 0.01N • m (0.5 ± 0.1kgf • cm)
* Tightening torque = 0.049
± 0.01N • m (0.5 ± 0.1kgf • cm)
Optical Steping
Motor (F1380)
Motor (F1380)
Optical Steping
Motor (F1380)
Motor (F1380)
Screw
Solders
Screw
Solders
4
1
2
3
Screw
Screw
Screw
Screw
Rear Mirror Plate
Screw
Screw
Screw
Screw
Rear Mirror Plate
Click on the first or last page to see other DSC-W360 / DSC-W560 (serv.man2) service manuals if exist.