DSC-W360, DSC-W560 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 21

DSC-W360_L2

3-1E

Attaching Method of LCD Cushion (680),
LCD Window (680)

Apply LCD cushion (680).
And have the Tab of the Release Paper and peel it off.

Fit LCD Window (680) into the flame of
Cabinet (Rear) Assy and attach it on LCD Cushion (680).

Attach Cabinet (Rear) Assy to set.

Cabinet (Rear) Assy

LCD Cushion (680)

LCD Window (680)

Rear Cabinet Assy

Blow the air before attaching.
Be sure to keep away from dust.

LCD Cushion (680)

LCD

Align corner of
LCD cushion (680)
with corner of LCD.

Tab

Release Paper

Precaution During Cabinet (Rear) Assy
Installation.

Align the slide switch of Cabinet (Rear) Assy with
the slide switch of SW-562 Board.  

Slide Switch

Slide Switch

Cabinet (Rear) Assy

SW-562 Board

Precaution During Main Frame
Installation.

Main Frame

Inside of 
Cabinet (Upper) Assy

Main Frame

Inside of 
Cabinet (Front) Assy

Precaution During SP-052 Board
Installation.

Route the speaker harness as shown below.

Sperker Harness

SP-052 Board

Inside of wall of
battery holder

SY

-241

Insulating Sheet (670) Putting Position

Insulating Sheet (670)

SY241 Board

Insulating Sheet (670)

Installation Method of Battery
Terminal Board

Insert the battery terminal board into a slit in 

Remove the battery terminal board by bending 
the claw of rock portion.
When assembling the battery terminal board, 
replace it with new one because battery 
terminal board will be bent.

BT holder to install.
* Battery terminal board is attached with notch for
  installation.

Fold the notch 3 or 4 times repeatedly to break.

Remove the notch.

Battery Terminal Board

Notch

Battery terminal board

Notch

Battery terminal 
board

Notch