Read Sony DSC-W330 (serv.man2) Service Manual online
DSC-W330_L2
1-7
qs
Match three ditches of the Fixed Stationaly Tube Block to three convex parts of the Straight Tube Lubcated Assy and install it.
qd
Install the Naruto Gear on the Fixed Stationaly Tube Block.
qg
Pass the Flexible Board through the hole of the Fixed Stationaly Tube.
qf
Rotate the Naruto Gear and the lens is drawn out.
qh
Rotate the Naruto Gear and the lens is
retractile
.
Eyepiece Side View
Straight Tube
Lubricated Assy
Lubricated Assy
Fixed Stationaly Tube Block
Fixed Stationaly
Tube Block
Tube Block
Fixed Stationaly
Tube Block
Tube Block
Ditches
Convex Parts
Flexible Board
Fixed Stationaly Tube
Naruto Gear
Naruto Gear
Lubricated Assy
Lubricated Assy
qj
Install the Warm B Lubricated Assy.
qk
Connect the Iris Flexible Board from connector of 2 Frame Assy.
w;
Install the 3 Group Frame.
ql
Install the 3 Group Spring.
wa
Install the Rear Mirror Plate with the four screws in the order of nambers.
* Tightening torque = 0.049 ± 0.01N • m (0.5 ± 0.1kgf • cm)
Warm B
Lubricated Assy
Lubricated Assy
Screw
Screw
Screw
Screw
Rear Mirror Plate
3 Group Frame
3 Group
Spring
Spring
3 Group Frame
3 Group Spring
4
1
2
3
Iris Flexible Board
Flexible Board
of 2 Frame Assy
of 2 Frame Assy
ws
Perform the Flange Back Adjustment after the assembling.
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
Ver. 1.4 2010.08
Click on the first or last page to see other DSC-W330 (serv.man2) service manuals if exist.