DSC-W210, DSC-W215 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 5

1-1

DSC-W210/W215_L2

When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATON DATA WRITE”.

When you replace to the repairing board, get the data from the former one.
Start the Adjust Manual in the Adjust Station and perform “RESTORE DATA” to get the data.
The data getting for this model is as follows.

• USB SERIAL No.

The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Start the Adjust Manual in the Adjust Station and execute the “USB SERIAL No. INPUT”.

The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.)

When replacing the SY-215 board, erase the data in internal memory of the board before replacement.

When replacing the SY-215 board, execute formatting and initialize the internal memory after replacement.

Copies all images in the internal memory to a “Memory Stick Duo” media.

1

Insert a “Memory Stick Duo” media having sufficient free capacity.

2

Select [Copy] with v/V on the control button, then press z.
The message “All data on internal memory will be copied” appears.

3

Select [OK] with v, then press z.
Copying starts. 

Select [Cancel] in step 3, then press z.

  Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little 

remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.

  You cannot select images to copy.

  The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick Duo” media after copying, then format the internal memory 
([Format] in [Internal Memory Tool]). 

  A new folder is created on the “Memory Stick Duo” media and all the data will be copied to it. You 

cannot choose a specific folder and copy images to it.

  The 

 (Print order) marks on the images are not copied.

z

 

z

 

z

 

z

 

z

 

This item does not appear when a “Memory Stick Duo” media is inserted in the camera.

Formats the internal memory.

  Note that formatting permanently erases all data in the internal memory, including even protected images.

1

Select [Format] with v/V on the control button, then press z.
The message “All data on internal memory will be erased” appears.

2

Select [OK] with v, then press z.
Formatting starts.

Select [Cancel] in step 2, then press z.

z