DSC-W200 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 13

6-11

DSC-W200_ADJ

Before performing the adjustment, “Setting of Adjustment Mode”
is required.

[Setting method]
1) Connect the Camera to the PC with a USB cable, and turn on

the power switch.

2) Start the Automatic Adjustment Program, and click the [Con-

nect] button on the Main Menu screen.

3) When the following message is displayed, turn off and on again

the power switch of the Camera.
Note: Turning off and on the power switch causes the Cam-

era to be switched to the Adjustment Mode. After the
Camera restarted, click the [OK] button in the message
window.

4) Upon successful completion of the settings in the Adjustment

Mode, the operation of each button on the Main Menu screen
is enabled.

To finish the adjustment, be sure to perform “Release of Adjust-
ment Mode”.

[Releasing method]
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-

ment mode has completed. Click the [OK] button in the mes-
sage window to exit the Automatic Adjustment Program.
Note: The Camera switches to the normal mode by turning

off and on the power switch. After the adjustment fin-
ished, turn off and on again the power switch of the
Camera to confirm that the USB mode screen is dis-
played.