DSC-W15, DSC-W17, DSC-W5, DSC-W7 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 28

6-26

DSC-W5/W7/W15/W17

By performing the following procedure, data of all pages will be
initialized.
Note: If all page data have been initialized, all adjustments need

to be performed again.

Initializing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Click [Sector Write] on the SEUS screen to display the SEUS

SECTOR WRITE screen.

3) Check that the SET ID is “06: DSC-W5/W15” or “07: DSC-

W7/W17”.

4) Click  [All]  of the ALL SELECT buttons to select all pages.

(Fig. 6-1-62 A)

5) Click [Write] to write the initializing data to the flash memory

of the camera.

6) Wait for 3 sec.
7) Click [Close] to close the SEUS SECTOR WRITE screen.
8) Click [Save] on the SEUS screen.
9) Wait for more than 3 sec.
10) Select page: 80, address: 30, and check that the data is “00”.

Order Page Address

Data

Procedure

1

40

28

01 [Set]

(Note)

Note: At this time, the camera is reset and the power is turns off

once and then on again. Accordingly, the SEUS goes in
“disconnect” state, but this is not a trouble. Click [Connect]
on the SEUS screen to restore the “connected” state. (In
case that the power does not turn on again, press the power
button.)

By performing the following procedure, data of the page that you
want to initialize will be initialized.
Note 1: If the 6D or 6E or 6F or 78 or 79 page data have been

initialized, the following adjustment needs to be per-
formed again.
1) Camera system adjustments

Note 2: If the 8F page data have been initialized, the following

adjustment needs to be performed again.
1) Video system adjustments
2) LCD system adjustments

Initializing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Click [Sector Write] on the SEUS screen to display the SEUS

SECTOR WRITE screen.

3) Check that the SET ID is “06: DSC-W5/W15” or “07: DSC-

W7/W17”.

4) Click “All” of the option buttons of target page. (Fig. 6-1-62

B

)

5) Click [Write] to write the initializing data to the flash memory

of the camera.

6) Wait for 3 sec.
7) Click [Close] to close the SEUS SECTOR WRITE screen.
8) Click [Save] on the SEUS screen.
9) Wait for more than 3 sec.
10) Select page: 80, address: 30, and check that the data is “00”.

Order Page Address

Data

Procedure

1

40

28

01 [Set]

(Note)

Note: At this time, the camera is reset and the power is turns off

once and then on again. Accordingly, the SEUS goes in
“disconnect” state, but this is not a trouble. Click [Connect]
on the SEUS screen to restore the “connected” state. (In
case that the power does not turn on again, press the power
button.)

B

A

06

06: DSC-W5/W15
07: DSC-W7/W17