DSC-W120, DSC-W125 (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 34

6-33

DSC-W120/W125_ADJ

On the AGING screen, various types of aging can be executed.
Select the type of aging to be executed with the Aging Mode Se-
lect buttons.

Supply the power not from an AC adaptor but from the fully charged
battery and execute the aging until the battery end, so that its bat-
tery use time and how many pictures the camera can record/play
back can be checked.

During the execution of aging, the camera automatically repeats
recording/playback.
During the recording, if the recording memory capacity becomes
full, its memory is automatically formatted.
Accordingly, when executing the aging, insert the Memory Stick
into the camera.

[Preparation]
For the aging, set the camera as follows:

Switch Setting
1) Mode Dial .................................................... Auto Adjustment

Home Items
1) AF Mode

(Settings – Shooting Settings – Shooting Settings 1) .... Single

Menu Items
1) REC Mode ................................................................... Normal

In the 10MODE, perform continuous recording in accordance with
the CIPA Standard. When the 10MODE starts, the following op-
eration is repeated until the battery end.
1) The zoom moves to the TELE end.
2) The camera records a still picture with a strobe light flashed at

the maximum level.

3) The camera stands by for the time (sec.) set to the “Rec Inter-

val”.

4) The zoom moves to the WIDE end.
5) The camera records a still picture without flashing a strobe

light.

6) The camera stands by for the time (sec.) set to the “Rec Inter-

val”.

7) Each time 10 still pictures are recorded, the power is turned

off, and after the time (min.) set to the “Power Off Interval”,
the power is turned on again.

At the start of 10MODE, the counter in the camera is initialized.
This counter counts the number of recording times during the ex-
ecution of 10MODE, and it holds the counts even during the power
off.

Aging Mode Select button