DSC-W100 (serv.man9) - Sony Digital Camera Service Manual (repair manual). Page 2

— 2 —

DSC-W100_L2

When you exchange ST-146 flexible board for service, cut the wall of ST holder as follows and put together.
1

 Cut the wall along the side wall.

2

 Cut the wall along the side wall.

* Cut until the end A line.
3

 Bend the wall the direction mentioned left side and clear the wall.

Size of burr should be under 0.25 mm at the bottom, under 0.5 mm at the side wall after cutting.
And, make clearance between the side wall and the chip capacitor on the flex.

1

2

A

3

After Modify of ST Holder

ST-146 Flexible Board

ST Holder

Chip Capacitor

Clearance
is required