DSC-U30 (serv.man2) - Sony Digital Camera Service Manual (repair manual)

dsc-u30 (serv.man2) service manual
Model
DSC-U30 (serv.man2)
Pages
57
Size
2.75 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-u30-sm2.pdf
Date

Read Sony DSC-U30 (serv.man2) Service Manual online

SERVICE MANUAL
LEVEL
 
2
Link
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
Link
Revision History
Revision History
DSC-U30
Photo: SILVER model
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Korea model
Tourist Model
Japanese Model
Ver 1.1  2004. 10
DIGITAL STILL CAMERA
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987626351.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987626341.pdf).
• This service manual contains information for Japanese model as well.
• Reference No. search on printed wiring boards is available.
• HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
On the DD-209, PD-174 and TY-20 boards
This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the DD-209, PD-174 and TY-20 boards.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the DD-209,
PD-174 and TY-20 boards are not shown.
The following pages are not shown.
Schematic diagram ........................... Pages 4-11 to 4-24
Printed wiring board .......................... Pages 4-39 to 4-44
Waveforms .......................................... Pages 4-58 and 4-59
Mounted parts location ...................... Pages 4-61 and 4-62
Electrical parts list ............................ Pages 5-7, 5-8, 5-10,
5-12 to 5-14
— 2 —
DSC-U30
x
Camera
[System]
Image device
6.72 mm (1/2.7 type) color CCD 
Primary color filter
Total pixels number of camera
Approx. 2 112 000 pixels
Effective pixels number of camera
Approx. 2 020 000 pixels
Lens
Single focal lens
f = 5.0 mm 
(7/32 inches) (35 mm camera 
conversion: 33 mm (1 5/16 inches))
F2.8
Exposure control
Automatic, Scene Selection 
(5 modes)
Data formats
Still images: DCF compliant 
(Exif Ver. 2.2 JPEG compliant), 
DPOF compatible
Movies: MPEG1 compliant (without 
audio)
Recording media
“Memory Stick”
Flash
Recommended distance: 0.5 m to 
1.8 m (1 foot 7 3/4 inches to 5 feet 
10 3/4 inches)
[Output connector]
USB jack
mini-B
[LCD screen]
LCD panel used
2.5 cm (1.0 type) TFT drive
Total number of dots
64 460 (293×220) dots
[Power, general]
Used batteries
AAA Nickel-Metal Hydride 
batteries (2) 2.4 V
5 V (from USB cable)
Power consumption (when shooting)
1.35 W
Operating temperature range
0°C to +40°C (+32°F to +104°F)
Storage temperature range
–20°C to +60°C (–4°F to +140°F)
Dimensions
85 × 40.3 × 29.7 mm 
(3 3/8 × 1 5/8 × 1 3/16 inches)
(W/H/D, protruding portions not 
included)
Mass
Approx. 123 g (4.3 oz) (two 
batteries, “Memory Stick,” and neck 
strap included)
Exif Print 
Compatible
PRINT Image Matching II
Compatible
x
BC-CS2A/CS2B Ni-MH 
battery charger
Input rating
100 – 240 V AC, 50/60 Hz, 3 W
Output rating
DC OUT AA: 1.4 V, 
400 mA × 2
AAA: 1.4 V, 
160 mA × 2
Operating temperature range
0°C to +40°C (+32°F to +104°F)
Storage temperature range
–20°C to +60°C (–4°F to +140°F)
Dimensions
Approx. 71 × 30 × 91 mm 
(2 7/8 × 1 3/16 × 3 5/8 inches) 
(W/H/D)
Mass
Approx. 90 g (3 oz)
Accessories
• HR11/45: HR03 (Size AAA) Ni-MH batteries (2) 
• Battery case (1)
• BC-CS2A/CS2B Ni-MH battery charger (1)
• Power cord (mains lead) (1)
• USB cable (1)
• Neck strap (1)
• “Memory Stick” (8MB) (1)
• CD-ROM  (USB driver SPVD-010) (1)
• Operating  instructions (1)
Design and specifications are subject to change 
without notice.
SPECIFICATIONS
COVER
COVER
— 3 —
DSC-U30
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
— 4 —
DSC-U30
TABLE OF CONTENTS
Section
Title
Page
1.
SERVICE NOTE
1-1.
Note for Repair ································································ 1-1
1-2.
Discharging of the SL-59 Flexible Board’s
Charging Capacitor (C601) ············································· 1-1
1-2-1. Preparing the Short Jig ···················································· 1-1
1-2-2. Discharging the Capacitor ··············································· 1-1
1-3.
Description on Self-diagnosis Display ···························· 1-2
2.
DISASSEMBLY
2-1.
Cabinet (Front) Assembly ··············································· 2-3
2-2.
OP-17 Flexible Board ······················································ 2-3
2-3.
Cabinet (Rear) Assembly ················································· 2-4
2-4.
PD-174 Board ·································································· 2-4
2-5.
Bottom Frame Assembly ················································· 2-5
2-6.
Lens Block Assembly ······················································ 2-5
2-7.
SL-59 Flexible Board ······················································ 2-6
2-8.
CCD Block Assembly ····················································· 2-6
2-9.
TY-20 Board ···································································· 2-7
2-10. Cabinet (Upper) Assembly ·············································· 2-7
2-11. US-7 Flexible Board ························································ 2-8
2-12. DD-209 Board ································································· 2-8
2-13. Circuit Boards Location ·················································· 2-9
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram (1/2) ··········································· 3-1
3-2.
Overall Block Diagram (2/2) ··········································· 3-3
3-3.
Power Block Diagram (1/2) ············································· 3-5
3-4.
Power Block Diagram (2/2) ············································· 3-7
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagram ·············································· 4-1
4-2.
Schematic Diagrams ························································ 4-5
CD-425 FLEXIBLE (1/2) (CCD IMAGER) ··················· 4-7
CD-425 FLEXIBLE (2/2) (CAMERA MODULE) ········· 4-9
SL-59 FLEXIBLE
(CHARGING CAPACITOR, FLASH UNIT) ··············· 4-25
ST-79 (FLASH DRIVE) ················································ 4-25
US-7 FLEXIBLE (USB CONNECTOR) ······················ 4-27
OP-17 FLEXIBLE (LENS COVER DETECT) ············ 4-28
SW-376 FLEXIBLE
(CONTROL SWITCH, MS CONNECTOR) ················ 4-29
RS-85, FP-532, FP-533 FLEXIBLE ····························· 4-31
4-3.
Printed Wiring Boards ··················································· 4-35
CD-425 FLEXIBLE ······················································ 4-37
SL-59 FLEXIBLE ························································· 4-45
ST-79 ············································································· 4-47
US-7 FLEXIBLE ··························································· 4-49
OP-17 FLEXIBLE ························································· 4-51
SW-376 FLEXIBLE ······················································ 4-53
4-4.
Waveforms ····································································· 4-57
4-5.
Mounted Parts Location ················································ 4-60
5.
REPAIR  PARTS  LIST
5-1.
Exploded Views ···························································· 5-2
5-1-1. Cabinet Section ····························································· 5-2
5-1-2. Cabinet (Upper) and Bottom Section ···························· 5-3
5-1-3. Stroboscope and Lens Section ······································ 5-4
5-1-4. Battery Holder and LCD Section ·································· 5-5
5-2.
Electrical Parts List ······················································· 5-6
Page of 57
Display

Download Sony DSC-U30 (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Sony DSC-U30 (serv.man2) Service Manual in PDF. DSC-U30 (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-U30 (serv.man2) Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.