Read Sony DSC-U20 (serv.man4) Service Manual online
DSC-U20
6-4
Fig. 6-1-3
Fig. 6-1-2
Front of the lens
Pattern box
L
L = About 30 cm
1-1-2.
Preparations
1) Connect the equipment for adjustments according to Fig. 6-1-3.
2) Start up the application for adjustment (SEUS).
2) Start up the application for adjustment (SEUS).
Note 1:
Setting the “Forced CAMERA mode power ON Mode”
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 11, and write data: E0.
3) Select page: 2F, address: 12, and write data: BC.
4) Select page: 20, address: 00, and set data: 29.
5) Select page: 20, address: 01, and write data: 29.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 11, and write data: E0.
3) Select page: 2F, address: 12, and write data: BC.
4) Select page: 20, address: 00, and set data: 29.
5) Select page: 20, address: 01, and write data: 29.
At this time, the set is reset and the power is turns
off once and then on again. Accordingly, the mes-
sage “Receive Packet Error” is displayed on the
SEUS screen, and the SEUS goes in “disconnect”
state, but this is not a trouble. Click
off once and then on again. Accordingly, the mes-
sage “Receive Packet Error” is displayed on the
SEUS screen, and the SEUS goes in “disconnect”
state, but this is not a trouble. Click
[Connect]
on
the SEUS screen to restore the “connected” state.
6) Select page: 00, address: 01, and set data: 01.
7) Select page: 2F, address: 21, and write data: 02.
7) Select page: 2F, address: 21, and write data: 02.
The above procedure will enable the camera power to
be turned on. After completing adjustments, be sure to
exit the “Forced CAMERA mode power ON Mode”.
be turned on. After completing adjustments, be sure to
exit the “Forced CAMERA mode power ON Mode”.
Note 2:
Exiting the “Forced CAMERA mode power ON Mode”
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 21, and write data: 00.
3) Select page: 2F, address: 12, and write data: 2C.
4) Select page: 2F, address: 11, and write data: 60.
5) Select page: 00, address: 01, and set data: 00.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 21, and write data: 00.
3) Select page: 2F, address: 12, and write data: 2C.
4) Select page: 2F, address: 11, and write data: 60.
5) Select page: 00, address: 01, and set data: 00.
DSC-U20
HASP Key
Insert the Memory Stick
and the Batteries
and the Batteries
*.
To USB connector
To USB connector
To USB connector
USB cable
(1-823-932-11)
*:
Size AAA
Nickel Metal Hydride
batteries (x 2)
Nickel Metal Hydride
batteries (x 2)
PC
with USB connectors (x 2)
(Windows 98/98SE/ME/2000/XP)
LOCK
Click on the first or last page to see other DSC-U20 (serv.man4) service manuals if exist.