Read Sony DSC-U10 (serv.man3) Service Manual online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver 1.0 2002. 07
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
Link
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Tourist Model
Japanese Model
DIGITAL STILL CAMERA
DSC-U10
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
DSC-U10
SPECIFICATIONS
COVER
COVER
System
Image device
6.65 mm (1/2.7 type) color CCD
Primary color filter
Primary color filter
Total pixels number of camera
Approx. 1 340 000 pixels
Effective pixels number of camera
Approx. 1 260 000 pixels
Lens
Single focal lens
f = 5.0 mm (7/32 inches) (35 mm camera
conversion: 33 mm (1 5/16 inches))
F2.8
f = 5.0 mm (7/32 inches) (35 mm camera
conversion: 33 mm (1 5/16 inches))
F2.8
Exposure control
Automatic, Scene selection (three modes)
Data formats
Still images: DCF compliant
(Exif Ver. 2.2 JPEG compliant),
DPOF compatible
Movies: MPEG1 compliant (without audio)
(Exif Ver. 2.2 JPEG compliant),
DPOF compatible
Movies: MPEG1 compliant (without audio)
Recording media
“Memory Stick”
Flash
Recommended distance: 0.5 m to 1.8 m (1.6 to
6.0 ft)
6.0 ft)
Connector
USB jack
mini-B
LCD screen
LCD panel used
2.5 cm (1.0 type) TFT drive
Total number of dots
64 460 (293
×
220) dots
Power, general
Used batteries
AAA Nickel Metal Hydride batteries (2) 2.4 V
5 V (from USB cable)
5 V (from USB cable)
Power consumption (when shooting)
1.25 W
Operating temperature range
0
°
C to +40
°
C (32
°
F to +104
°
F)
Storage temperature range
–20
°
C to +60
°
C (–4
°
F to +140
°
F)
Dimensions
85
×
29
×
40 mm
(3 3/8
×
1 3/16
×
1 5/8inches)
(W/H/D, protruding portions not included)
Mass
118 g (4.2 oz) (AAA Nickel Metal Hydride
batteries, “Memory Stick,” and neck strap
included)
batteries, “Memory Stick,” and neck strap
included)
BC-CS1 Ni-MH battery charger
Power requirements
AC 100 to 240V 50/60Hz
2.2 W
2.2 W
Output voltage
Size AA: DC 1.8V, 165 mA
×
2
Size AAA: DC 1.8V, 70 mA
×
2
Dimensions
70
×
29
×
74 mm (2 7/8
×
1 3/16
×
3 inches)
(W/H/D)
Mass
Approx. 70g (2.5 oz.)
Operating temperature range
0
°
C to 40
°
C (32
°
F to 104
°
F)
Accessories
• Size AAA Ni-MH batteries (2)
• Ni-MH battery charger (1)
• Power cord (mains lead) (1)
• USB cable (1)
• Neck strap (1)
• “Memory Stick” (8MB) (1)
• CD-ROM (SPVD-008) (1)
• Operating instructions (1)
Design and specifications are subject to change without notice.
— 3 —
DSC-U10
SELF-DIAGNOSIS FUNCTION
COVER
COVER
[Description on Self-diagnosis Display]
Self-diagnosis display
• C: ss: ss
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
• E: ss: ss
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the “Memory stick”.
Insert a new “Memory Stick”.
Cause
Trouble with hardware.
Unformatted memory stick is inserted.
Memory stick is broken.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
E:61:ss
E:91:ss
Checking of lens drive circuit.
When failed in the focus initialization.
Abnormality when flash is being
charged.
charged.
Checking of flash unit or replacement
of flash unit.
of flash unit.
—
1. MAIN PARTS
DSC-U10
— 4 —
1. ORNAMENTAL PARTS
Note:
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• The parts numbers of such as a cabinet are also appeared in this section.
Refer to the parts number mentioned below the name of parts to order.
• Abbreviation
AUS: Australian model
CH : Chinese model
CH : Chinese model
COVER
COVER
Sony EMCS Co.
2002G0500-1
©2002.7
Published by DI Customer Center
9-929-987-41
AAA battery case
3-076-474-01
3-076-474-01
Checking supplied accessories.
Neck strap
3-076-620-01
3-076-620-01
CD-ROM
(SPVD-008 USB driver) (1)
3-077-012-01 (US, CND, J)
3-077-023-01 (EXCEPT US, CND, J)
(SPVD-008 USB driver) (1)
3-077-012-01 (US, CND, J)
3-077-023-01 (EXCEPT US, CND, J)
USB cable (1)
1-823-932-11
1-823-932-11
Power cord (1)
0
1-696-819-11 (AUS)
0
1-769-608-11 (AEP, E)
0
1-782-476-11 (CH)
0
1-783-374-11 (UK, HK)
0
1-790-107-22 (US, CND)
0
1-790-732-11 (JE, J)
Nickel-Metal hybrid battery
(NH-AAA)
(NH-AAA)
"Memory Stick" (8MB) (1)
Other accessories
0 1-569-007-11 ADAPTOR, CONVERSION (E, JE)
3-065-665-05 MANUAL, INSTRUCTION (JAPANESE) (J)
3-076-559-02 MANUAL, INSTRUCTION (JAPANESE) (J)
3-076-559-12 MANUAL, INSTRUCTION (ENGLISH)
3-076-559-02 MANUAL, INSTRUCTION (JAPANESE) (J)
3-076-559-12 MANUAL, INSTRUCTION (ENGLISH)
(US, CND, AEP, UK, E, AUS, CH, HK, JE)
3-076-559-21 MANUAL, INSTRUCTION (FRENCH, GERMAN)
(CND, AEP)
3-076-559-32 MANUAL, INSTRUCTION
(SPANISH, PORTUGUESE) (AEP, E, JE)
3-076-559-41 MANUAL, INSTRUCTION (ITALIAN, DUTCH)
(AEP)
3-076-559-52 MANUAL, INSTRUCTION
(TRADITIONAL CHINESE,
SIMPLIFIED CHINESE)
(E, CH, HK, JE)
3-076-559-61 MANUAL, INSTRUCTION
(RUSSIAN, SWEDISH) (AEP)
3-076-559-72 MANUAL, INSTRUCTION (ARABIC) (E)
Battery charger (BC-CS1)
0
1-477-227-12 (J)
0
1-477-227-22 (US, CND)
0
1-477-227-33
(AEP, UK, E, AUS, HK, JE)
0
1-477-227-52 (CH)
CND: Canadian model
HK : Hong Kong model
HK : Hong Kong model
JE
: Tourist model
J
: Japanese model
USB cover
3-076-539-01
3-076-539-01
（
When change it, need dismantle the set.
）
Les composants identifiés par une
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
The components identified by
mark 0 or dotted line with mark
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Replace only with part number
specified.
