DSC-TX7, DSC-TX7C (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 16

Read Sony DSC-TX7 / DSC-TX7C (serv.man2) Service Manual online

DSC-TX7/TX7C_L2
3-1E
3. ASSEMBLY
Assembly-1:
How to distinguish the side of Optical Filter
Block facing to Lens Device
• IR cut coating surface
  The red coating is reflected.
• The other surface
  The red coating is 
  not reflected.
• Side view
  The red belt
  is seen.
Lens Device side
Lens Device side
Hold it with tweezers or the like.
Optical Filter 
Block 
[IR Cut Coated Side]
[The Other Side]
The one side of the Optical Filter Block has treated
with IR cut coating.
Mount the Optical Filter Block  facing the IR cut 
coated side to the lens device.
Distinguish the IR cut coated side from the other by
applying the fluorescent light to 
the Optical Filter Block in the dark place
(cut off the outside light).
Assembly-3: Installation Cautions of Cabinet (Front) Assy
1
2
5
4
3
  Install the fix screws in the order of nambers.
  Do not tighten screws while holding both front
    and rear cabinets strongly.
It may cause the color variability on LCD panel by 
tightening the screw with holding the cabinet strongly.
(It is easy to discriminate the color variability 
by displaying the whiteness.)
Assembly-2:
Installation Cautions of Lens Light 
Interception Sheet
Lens Light
Interception
Sheet
It should be lying on the interposer.
Hold here.
0
0
+0.5
+1
It should be lying on the interposer.
Confirm the this part is
trapezoid shape. 
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.2 2010.03
Page of 23
Display

Click on the first or last page to see other DSC-TX7 / DSC-TX7C (serv.man2) service manuals if exist.