Read Sony DSC-TX10 (serv.man2) Service Manual online
DSC-TX10_L2
3-1E
3. ASSEMBLY
Assembly-1: How to distinguish the side of Optical Filter
Block facing to Lens Device
• IR cut coating surface
The red coating is reflected.
• The other surface
The red coating is
not reflected.
not reflected.
• Side view
The red belt
is seen.
is seen.
Lens Device side
Lens Device side
Hold it with tweezers or the like.
Optical Filter
Block
Block
[IR Cut Coated Side]
[The Other Side]
The one side of the Optical Filter Block has treated
with IR cut coating.
Mount the Optical Filter Block facing the IR cut
coated side to the lens device.
Distinguish the IR cut coated side from the other by
applying the fluorescent light to
the Optical Filter Block in the dark place
(cut off the outside light).
with IR cut coating.
Mount the Optical Filter Block facing the IR cut
coated side to the lens device.
Distinguish the IR cut coated side from the other by
applying the fluorescent light to
the Optical Filter Block in the dark place
(cut off the outside light).
Assembly-2: Installation Cautions of Lens Light
Interception Sheet
0
0
+0.5
+1
It should be lying on the interposer.
It should be lying on the interposer.
