DSC-T90 (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 7

Read Sony DSC-T90 (serv.man3) Service Manual online

1-3
ENGLISH
JAPANESE
ENGLISH
JAPANESE
DSC-T90_L2
1-4. HOW  TO  WRITE  DATA  TO  INTERNAL  MEMORY
Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
To change settings is enabled with using the writing enabler tool (Write Enable Tool) on the Adjust Manual is activating from the Adjust
Station.
Data Writing Method
1)
Start the Adjust Manual from the Adjust Station.
2)
Click 
 (Write Enable Tool) button.
3)
Click “Active Write Enable Mode” button.
4)
Upon completion of the setting change, the following message will be displayed.
5)
Return the driver to the original one, and connect the PC to the camera (USB mode: Mass Storage).
6)
Write the data read out into the PC to the internal memory of the camera.
7)
Disconnect the PC from the camera, and turn off the camera.
Note:
By turning off the camera, the write enable setting is reset.
Page of 63
Display

Click on the first or last page to see other DSC-T90 (serv.man3) service manuals if exist.