Read Sony DSC-T9 (serv.man4) Service Manual online
6-5
DSC-T9_ADJ
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
Back light unit
(AF illumination LED)
(Timing gen., CCD signal process)
(Camera DSP)
(Video amp.)
(64M super AND) (Note 4)
(YAW, PITCH sensor)
LCD901
D901
D002
IC101
IC301
IC605
IC401
SE501, SE502
(COMPLETE)
(COMPLETE) (Note 3, 4, 5)
Lens block
CCD block assy (Including CD-597 flexible board and CCD imager)
Flash unit
LCD block
LCD block
ST-131 board
SY-141 board
SY-141 board
SY-141 board
SY-141 board
SY-141 board
ST-131 board
SY-141 board
VIDEO adjustment
Video output level adj.
z
z
z
CAMERA adjustment 1
Hall adj.
z
z
(Note 1)
Wide limit adj.
z
z
CAMERA adjustment 2
Flange back adj.
z
z
z
CAMERA adjustment 3
Flange back check
z
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z
z
z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 6
Strobe adj.
z
z
z
z
z
CAMERA adjustment 7
Auto focus illumination check
z
z
z
(Note 1)
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
(Note 1)
Initialization of data
z
z
LCD adjustment
CAMERA adjustment 4
z
z
CAMERA adjustment 5
z
z
z
z
z
z
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The automatic Adjustment Program does not support the “Initialization of data” , “Wide Limit Adjustment” and “Angular Veloc-
ity Sensor Sensitivity Adjustment”. Perform them manually.
ity Sensor Sensitivity Adjustment”. Perform them manually.
Note 2:
Use the AWB Adjustment Program (T9AwbAdjustment.exe).
Note 3:
When replacing the SY-141 board, erase the data in internal memory of the board before replacement.
Note 4:
When replacing the SY-141 board or the IC401 on the SY-141 board, execute formatting and initialize the internal memory after
replacement.
replacement.
Note 5:
When replacing the SY-141 board, perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” after re-
placement.
placement.
Table 6-1-1
Click on the first or last page to see other DSC-T9 (serv.man4) service manuals if exist.