DSC-T77 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 4

1-1

DSC-T77_L2

When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Refer to Service Manual ADJ, and perform “DESTINATION DATA WRITE”.

The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Refer to Service Manual ADJ, and perform “USB SERIAL No. INPUT”.

When you replace to the reparing board, write down the sensitivity displayed on the angular velocity sensor (SE510).
Refer to Service Manual ADJ, and perform “Angular velocity sensor sensitivity adj”.

PPP

YYY

YYY:   YAW Sensor sensitivity

SE510

PPP:   PITCH Sensor sensitivity

The sensor sensitivity of SE510 of SY-207 board is written only repair parts.

When replacing the lens, write down the PITCH/YAW data, FN data and wide limit data given on the data sheet of the replacement lens for
service.
Refer to Service Manual ADJ, and perform “Wide Limit adj” and “Angular velocity sensor sensitivity adj”.

XX

YY

F

N

L

1

/L

2

Wide Limit Data (2-byte data)

XXYY

YAW data

PITCH/YAW Data

PITCH data

P.PP / Y.YY

FN Data

FN data

XX

The PITCH/YAW data, FN data and wide limit data of lens
are written only repair parts.