DSC-T500 - Sony Digital Camera Service Manual (repair manual). Page 5

Read Sony DSC-T500 Service Manual online

1-3
DSC-T500_L3
1-5. INTERNAL MEMORY (Write Enable)
Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
1. Function of Each Button on INTERNAL MEMORY (Write Enable) Screen
Click the [INTERNAL MEMORY (Write Enable) ] button on the Main Menu screen, and the follwing “INTERNAL MEMORY (Write
Enable)” screen will appear.
2. INTERNAL MEMORY (Write Enable)
[Preparations]
Insert the battery pack.
Remove the Memory Stick.
[Procedure]
[Procedure]
[Procedure]
[Procedure]
[Procedure]
1) Click the [Activate Write Enable] button.
2) Upon completion of the setting change, the following message will be displayed.
3) Disconnect the lead wire from the GND of the modified multioutput stand.
4) Disconnect the USB cable and reconnect the USB cable to activate the MassStorage mode for the USB connection.
5) Write the data read out into the PC to the internal memory of the camera.
6) Exit the adjustment program, and turn off the power of the camera, and the write enable setting will be cancelled.
1
2
3
1 [To Menu] button
Return to the main menu.
2 [Activate Write Enable] button
Change the setting so that the data can be written to the internal
memory.
3 [Procedure] button
Indicate the procedure.
Page of 35
Display

Click on the first or last page to see other DSC-T500 service manuals if exist.