DSC-T50 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 25

6-23

DSC-T50_ADJ

At this time, the following message is displayed, and click the
[Yes] button if the check result display at the upper right of
Color Reproduction Check screen is OK, or the [No] button if
NG.

5) Upon successful completion of “3. Color Reproduction Adj.

& Check”, the following message is displayed. Change the
chart in accordance with the message.

6) Click the [OK] button, and the items from “4. CCD Linearity

Check” to “7. Release of Data Setting during Camera Adj.”
will be executed.

7) Upon successful completion of all items of the CAMERA

Adjustment 5, the following message is displayed. Click the
[OK] button.

After executing the “AWB 3200-5800K Standard Data In-
put” perform the “CAMERA Adjustment 5” successively
without turning off the power switch of the camera.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting
3. Color Reproduction Adj. & Check
4. CCD Linearity Check
5. CCD White Defect Compensation Check
6. CCD Black Defect Compensation Check
7. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 5.
2) The Automatic Adjustment Program executes the “1. Data Set-

ting during Camera Adj.”.

3) Upon successful completion of “1. Data Setting during Cam-

era Adj.”, “2. Picture Frame Setting” is executed. The follow-
ing message is displayed, and then referring to Fig. 6-1-29 to
Fig. 6-1-31 (See page 6-21), set the subject and click the [OK]
button.

4) After that, “3. Color Reproduction Adj. & Check” will be ex-

ecuted. Upon completion of adjustment, the check result is
displayed on the Color Reproduction Check screen.