DSC-T50 (serv.man12) - Sony Digital Camera Service Manual (repair manual). Page 2

Read Sony DSC-T50 (serv.man12) Service Manual online

— 2 —
DSC-T50_ADJ
DESTINATION  DATA  WRITE
If this processing is executed, the SY-164 board is set to the fac-
tory default setting according to the specified destination.
Setting items:
• Font data for camera display
• Initial setting of display language
• VIDEO OUT Default Data
1.
Function of Each Button on Destination Data Write
Screen
Click the [DESTINATION DATA WRITE] button on the Main Menu
screen, and the “DESTINATION DATA WRITE” screen in fol-
lowing figure will appear.
1
[To Menu] button
Return to the main menu.
2
Destination List
Select the written destination
3
[Data Write] button
Write the destination data to the camera.
4
[   ] button
Indicate the destination table.
5
[Procedure] button
Indicate the procedure.
?
• Addition of “DESTINATION DATA WRITE”
Precaution on Replacing the SY-164 Board
At first, execute “DESTINATION DATA WRITE” when the SY-164 board was replaced.
By executing this processing, “VIDEO OUT Default Data Check” and “INITIAL LANGUAGE Default Data Check” on page 6-1 and
page 6-2 of the Service Manual is no longer necessary.
2.
Destination Data Write
[Writing method]
1) Prepare a Memory Stick formatted by a camera.
2) Copy all of the font data CX_FONT1.ash to CX_FONT4.ash
supplied with this program to the root directory of the Memory
Stick.
3) Insert the Memory Stick in the set.
4) Select the target destination from the pulldown list.
5) Click the [Data Write] button.
6) When the “Set the camera to PB mode” message is appeared,
confirm that the camera mode is PB. Then click the [OK] button
to continue the processing.
7) Following message will be appeared after completing data
writing.
8) Remove the Memory Stick from the set and disconnect the USB
cable.
9) Execute the Initialize operation using the Setup screen.
1
2
4
3
5
Page of 3
Display

Click on the first or last page to see other DSC-T50 (serv.man12) service manuals if exist.