DSC-T5 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 3

6-1

DSC-T5_ADJ

• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not

required.

• Perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” mentioned below, and also the

adjustment items necessary after SY Board replacement.

When you replace to the repairing board, the written data of repairing board also might be changed to original setteing
because of broadcast system (NTSC/PAL).
When the data has changed because of board replaceing etc, check the default data of VIDEO OUT if destination code
is right. If not, rewrite to the right value.

Page

Address

Data

NTSC

PAL

4F

8D

00

01

4F

A2

00

01

Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click 

[Save]

 on the SEUS screen.

6) Select page: 80, address: 34, and check that the data is “00”.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.