DSC-T300 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 6

1-3

DSC-T300_L2

The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.)

Note 1: When replacing the SY-191 board, erase the data in internal memory of the board before replacement.
Note 2: When replacing the SY-191 board, execute formatting and initializing the internal memory after replacement.

This item does not appear when a “Memory Stick Duo” is inserted in the camera.

Formats the internal memory.

• Note that formatting permanently erases all data in the internal memory, including even protected images.

1

Touch [Format].
The message “All data on internal memory will be erased” appears.

2

Touch [OK].
Formatting starts.

Touch [Cancel] or [BACK] in step 

2

.

Copies all images in the internal memory to a “Memory Stick Duo”.

1 Insert a “Memory Stick Duo” having sufficient free capacity.

2 Touch [Copy].

The message “All data on internal memory will be copied” appears.

3 Touch [OK].

Copying starts.

Touch [Cancel] or [BACK] in step 

3

.

• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little 

remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.

• You cannot select images to copy.
• The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick Duo” after copying, then format the internal memory
([Format] in [Internal Memory Tool]) 

• A new folder is created on the “Memory Stick Duo” and all the data will be copied to it. You cannot
  choose a specific floder and copy images to it.

• The 

 (Print order) marks on the images are not copied.

When “FLASH error”  (Self-diagnosis Code  E : 91 : 01) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash
is changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the HOME screen.

Initializes the setting to the default setting. Even if you execute this function, the images 
stored in the internal memory are retained.

1

Touch [Initialize].
The message “Reset to default settings” appears.

2

Touch [OK].
The settings are reset to the default setting.

Touch [Cancel] or [BACK] in step 2.

• Be sure not to power off the camera while initializing.