Read Sony DSC-T300 (serv.man2) Service Manual online
HELP
DSC-T300_L2
cm
0
1
2
3
4
5
When soldering, print this sheet and use this as a
workbench for positioning.
workbench for positioning.
Positioning sheet for soldering
the piezoelectric buzzer (SP901)
the piezoelectric buzzer (SP901)
Note: Use this drawing in its actual scale.
If you cannot print this out in its actual scale, the PC
or printer setting is a probable cause.
In such a case, use a photocopier or another tool to
obtain the actual size.
If you cannot print this out in its actual scale, the PC
or printer setting is a probable cause.
In such a case, use a photocopier or another tool to
obtain the actual size.
Note: Be sure not to put the soldering height
higher than 0.7mm.
higher than 0.7mm.
Edge of cavity
for speaker
for speaker
0.1mm
HELP01
NOTE ON PUTTING ADHESIVE SHEET (SP)
HELP02
Adhesive sheet (SP)
BT holder assy
BT holder assy
Piezoelectric buzzer
(2.0cm)
(2.0cm)
Piezoelectric buzzer
(2.0cm)
(2.0cm)
MC-190 flexible board
MC-190 flexible board
Be careful not to put adhesive sheet (SP) out of cavity for speaker.
Adhesive sheet (SP)
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
Click on the first or last page to see other DSC-T300 (serv.man2) service manuals if exist.