DSC-T20 - Sony Digital Camera Service Manual (repair manual)

dsc-t20 service manual
Model
DSC-T20
Pages
35
Size
2.24 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / BRAZIL LEVEL 3
File
dsc-t20.pdf
Date

Read Sony DSC-T20 Service Manual online

MANUAL DE SERVIÇO
LEVEL
 
3
Revision History
Revision History
Link
NOTA DE SERVIÇO                        PLACAS DE CIRCUITO IMPRESSO
DIAGRAMAS ESQUEMÁTICOS
LISTA DE PEÇAS PARA REPARO
Link
Instruções do 
Acrobat Reader
Sony EMCS Co.- Sony Brasil Ltda
DSC-T20
Memória Interna
DA PLACA
DIGITAL STILL CAMERA
2007C0800-1
  © 2007.03
Publicado por Product & Quality Div.
9-
890-110-11
Ver 1.0  2007.03
The components identified by
mark  0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque  0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Brazillian
 Model
DSC-T20
Foto: Prata
— 2 —
DSC-T20
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
FLEXIBLE Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Model
Destination
DSC-T20
US, CND, AEP, UK, E, AUS,
HK, CH, KR, AR, BR, J, JE
DSC-T25
AEP, E, AUS, HK
• Abbreviation
AR : Argentine model
AUS: Australian model
BR : Brazilian model
CH : Chinese model
CND: Canadian model
EE : East European model
HK : Hong Kong model
J
: Japanese model
JE
: Tourist model
KR : Korea model
NE : North European model
TW : Taiwan model
Model information table
— 3 —
DSC-T20
ÍNDICE
1. 
NOTA DE SERVIÇO
1-3. MÉTODO PARA  COPIAR OU APAGAR OS DADOS DA MEMÓRIA INTERNA
MEMÓRIA (MEMÓRIA INTERNA / MUSICA) ································· · · · · · · · · · · 1-2
4. 
PLACAS DE CIRCUITO IMPRESSO E
DIAGRAMAS ESQUEMÁTICOS
4-2. DIAGRAMAS ESQUEMÁTICOS ········································································· 4-2
4-3. PLACAS DE CIRCUITO IMPRESSO ································································· 4-16
4-4. LOCALIZAÇÃO DAS PEÇAS MONTADAS ···················································· 4-22
5. 
LISTA DE PEÇAS PARA REPARO
5-2. LISTA DE PEÇAS ELÉTRICAS ·········································································· 5-6
Section
Title
Page
1-3
DSC-T20
1. 
NOTA DE SERVIÇO
1-4. 
MÉTODO PARA  COPIAR OU APAGAR OS DADOS DA MEMÓRIA INTERNA
(
MEMÓRIA INTERNA 
/
 MUSICA
)
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note 1:
When replacing the SY-170 board, erase the data in internal memory of the board before replacement.
Note 2:
When replacing the SY-170 board execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
Method for Formatting the Music
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1
Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.
2
Select [OK] with v, then press z.
The format is complete.
To cancel the formatting
Select [Cancel] in step 1 or 2, then press z.
Format
If you cannot play back a Music file for the Slide Show, the Music file might be corrupted. If 
this happens, perform [Format Music].
When [Format Music] is performed, all the Music files are erased. Use the supplied software 
“Music Transfer” to activate [Download Music].
1
Select [OK] with v on the control button, then press z.
The message “All data will be erased Ready?” appears.
2
Select [OK] with v, then press z.
All the Music files are erased.
To cancel the formatting
Select [Cancel] in step 1 or 2, then press z.
Format Music
Copies all images in the internal memory to a “Memory Stick Duo”.
1
Insert a “Memory Stick Duo” having 32 MB or larger capacity.
2
Select [Copy] with v/V/b/B on the control button, then press z.
The message “All data in internal memory will be copied” appears.
3
Select [OK] with v, then press z.
Copying starts. 
To cancel the copying
Select [Cancel] in step 3, then press z.
• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little 
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the 
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in 
[
 
Internal Memory Tool ]
 
.
• When you copy the data in the internal memory to the “Memory Stick Duo”, all the data will be copied. 
You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be 
copied.
• Even if you copy data, a DPOF (Print order) mark is not copied.
Copy
Page of 35
Display

Download Sony DSC-T20 Service Manual (Repair Manual)

Here you can read online and download Sony DSC-T20 Service Manual in PDF. DSC-T20 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-T20 Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.