DSC-T100 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 21

6-19

DSC-T100_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. COMPONENT OUT Y Level Adj.
3. COMPONENT OUT Pb Level Adj.
4. COMPONENT OUT Pr Level Adj.
5. Release of Data Setting during Video Adj.

[Adjusting method]
1) Click the [Start] button of the Component Video Level Adjust-

ment.

2) The Automatic Adjustment Program executes the “1. Data

Setting during Video Adj.”.

3) If “1. Data Setting during Video Adj.” completed successfully,

the following screen is displayed during the execution of “2.
COMPONENT OUT Y Level Adj.”. Using the [Up]/[Down]
button on the screen, adjust so that the Y signal level satisfies
the specified value. After the adjustment, check that the sync
level of the Y signals satisfies the specified value, and click
the [End] button in the screen.

4) After that, the following screen is displayed during the execu-

tion of “3. COMPONENT OUT Pb Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pb signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pb signals satisfies the specified value,
and click the [End] button in the screen.

5) After that, the following screen is displayed during the execu-

tion of “4. COMPONENT OUT Pr Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pr signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pr signals satisfies the specified value,
and click the [End] button in the screen.

6) If the [End] button is clicked, the items from “2. COMPO-

NENT OUT Y Level Adj.” to “4. COMPONENT OUT Pr Level
Adj.” and “5. Release of Data Setting during Video Adj.” will
be executed.

7) Upon successful completion of all item the Component Video

Level Adjustment, the following message is displayed. Click
the [OK] button.