Read Sony DSC-T1 Service Manual online
SERVICE MANUAL
DIGITAL STILL CAMERA
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
Link
Ver. 1.3 2007. 02
DSC-T1
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Korea Model
Chinese Model
Tourist Model
Japanese Model
— 2 —
DSC-T1
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
SPECIFICATIONS
x
Camera
[System]
Image device
7.66 mm (1/2.4 type) color CCD
Primary color filter
Primary color filter
Total pixels number of camera
Approx. 5 255 000 pixels
Effective pixels number of camera
Approx. 5 090 000 pixels
Lens
Carl Zeiss Vario-Tessar
3
3
×
zoom lens
f = 6.7 – 20.1 mm (38 – 114 mm when
converted to a 35 mm still camera)
F3.5 – 4.4
converted to a 35 mm still camera)
F3.5 – 4.4
Exposure control
Automatic exposure, Scene selection
(8 modes)
(8 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent, Flash
Fluorescent, Incandescent, Flash
File format (DCF compliant)
Still images: Exif Ver. 2.2 JPEG
compliant, DPOF compatible
Audio with still image: MPEG1
compliant (Monaural)
Movies: MPEG1 compliant
(Monaural)
compliant, DPOF compatible
Audio with still image: MPEG1
compliant (Monaural)
Movies: MPEG1 compliant
(Monaural)
Recording media
“Memory Stick Duo”
Flash
Recommended distance (ISO set to
Auto):
0.3 m to 1.5 m (11 7/8 inches to
59 1/8 inches) (W)
0.5 m to 1.5 m (19 3/4 inches to
59 1/8 inches) (T)
Auto):
0.3 m to 1.5 m (11 7/8 inches to
59 1/8 inches) (W)
0.5 m to 1.5 m (19 3/4 inches to
59 1/8 inches) (T)
[Input and Output connectors]
Multi connector
[LCD screen]
LCD panel
6.2 cm (2.5 type) TFT drive
Total number of dots
211200 (960
×
220) dots
[General]
Used battery pack
NP-FT1
Power requirements
3.6 V
Power consumption (during shooting)
1.6 W
Operating temperature
0
°
C to +40
°
C (+32
°
F to +104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to +140
°
F)
Dimensions
91
×
60
×
21 mm
(3 5/8
×
2 3/8
×
2 7/32 inches)
(W/H/D, excluding maximum
protrusions)
protrusions)
Mass
Approx. 180 g (6.3 oz) (including
battery pack NP-FT1, “Memory Stick
Duo” and wrist strap)
battery pack NP-FT1, “Memory Stick
Duo” and wrist strap)
Built-in microphone
Electret condenser microphone
Built-in speaker
Piezo-electric speaker
Exif Print
Compatible
PRINT Image Matching II
Compatible
x
UC-TA USB cradle
[Input and Output connectors]
A/V OUT (MONO) jack (Monaural)
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
Ω
, unbalanced,
sync negative
Audio: 327 mV (at a 47 k
Ω
load)
Output impedance 1 k
Ω
USB jack
B
USB connection
High-Speed USB
(USB 2.0 High-Speed compatible)
(USB 2.0 High-Speed compatible)
DC IN jack
Camera connector
Camera connector
x
AC-LM5 AC Adaptor
Power requirements
100 to 240 V AC, 50/60 Hz
Current consumption
0.2 A
Power consumption
10 W
Rated output voltage
4.2 V DC, 1.5 A
Operating temperature
0
°
C to +40
°
C (+32
°
F to +104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to +140
°
F)
Dimensions
Approx. 47
×
30
×
80 mm
(1 7/ 8
×
1
3/16
×
31/4 inches)
(W/H/D, excluding projecting parts)
Mass
Approx. 170 g (6.0 oz) excluding
power cord (mains lead)
power cord (mains lead)
x
NP-FT1 battery pack
Used battery
Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage
DC 3.6 V
Capacity
2.4 Wh (680 mAh)
x
Accessories
• AC-LM5 AC Adaptor (1)
• Power cord (mains lead) (1)
• UC-TA USB cradle (1)
• USB cable (1)
• NP-FT1 battery pack (1)
• A/V connecting cable (1)
• Wrist strap (1)
• “Memory Stick Duo” (32 MB) (1)
• Memory Stick Duo Adaptor (1)
• CD-ROM (USB driver SPVD-013) (1)
• Operating instructions (1)
Design and specifications are subject to change
without notice.
without notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
— 3 —
DSC-T1
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
Other accessories
3-085-733-01 MANUAL, INSTRUCTION SET (JAPANESE) (J)
3-085-733-11 MANUAL, INSTRUCTION SET (ENGLISH) (EXCEPT KR, J)
3-085-733-21 MANUAL, INSTRUCTION SET (FRENCH/GERMAN)
3-085-733-11 MANUAL, INSTRUCTION SET (ENGLISH) (EXCEPT KR, J)
3-085-733-21 MANUAL, INSTRUCTION SET (FRENCH/GERMAN)
(CND, AEP)
3-085-733-31 MANUAL, INSTRUCTION SET (SPANISH/PORTUGUESE)
(AEP, E, JE)
3-085-733-41 MANUAL, INSTRUCTION SET (ITALIAN/DUTCH) (AEP)
3-085-733-51 MANUAL, INSTRUCTION SET (CHINESE) (E, HK, CH, JE)
3-085-733-61 MANUAL, INSTRUCTION SET (RUSSIAN/SWEDISH) (AEP)
3-085-733-61 MANUAL, INSTRUCTION SET (RUSSIAN/SWEDISH) (AEP)
Make sure that the following accessories are supplied with your camcorder.
• Abbreviation
CND : Canadian model
AUS : Australian model
CH
AUS : Australian model
CH
: Chinese model
HK
: Hong Kong model
KR
: Korea model
JE
: Tourist model
J
: Japanese model
Note :
The components identified by
mark
The components identified by
mark
0
or dotted line with mark
0
are critical for safety.
Replace only with part number
specified.
specified.
Note :
Les composants identifiés par
une marque
Les composants identifiés par
une marque
0
sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ne les remplacer que par une
pièce portant le numéro spécifié.
“Memory stick Duo” (1)
(MSA-M32A)
(not supplied)
(MSA-M32A)
(not supplied)
AC-LM5 AC Adaptor (1)
(Except US, CND)
(Except US, CND)
0
1-477-488-12
AC-LM5 AC Adaptor (1)
(US, CND)
(US, CND)
0
1-477-488-21
Power cord (Main lead) (1)
(AUS model)
(AUS model)
0
1-696-819-11
Power cord (Main lead) (1)
(AEP, E model)
(AEP, E model)
0
1-769-608-11
Power cord (Main lead) (1)
(CH model)
(CH model)
0
1-782-476-13
Power cord (Main lead) (1)
(UK, HK model)
(UK, HK model)
0
1-783-374-11
Power cord (Main lead) (1)
(JE model)
(JE model)
0
1-790-732-12
Power cord (Main lead) (1)
(J model)
(J model)
0
1-791-637-13
Power cord (Main lead) (1)
(KR model)
(KR model)
0
1-776-985-11
Power cord (Main lead) (1)
(US, CND model)
(US, CND model)
0
1-790-107-22
A/V connecting cable (1)
1-824-111-11
1-824-111-11
CD-ROM
(USB Driver SPVD-013) (1)
(AEP, UK, E, HK, AUS, CH,
JE, KR model)
3-087-330-01
CD-ROM
(USB Driver SPVD-013 (I)) (1)
(US, CND, J model)
3-087-331-01
(USB Driver SPVD-013) (1)
(AEP, UK, E, HK, AUS, CH,
JE, KR model)
3-087-330-01
CD-ROM
(USB Driver SPVD-013 (I)) (1)
(US, CND, J model)
3-087-331-01
2-pin conversion adaptor (1)
(E model)
1-569-008-12
(E model)
1-569-008-12
UC-TA USB cradle (1)
1-817-742-11
1-817-742-11
USB cable (1)
1-828-073-11
1-828-073-11
2-pin conversion adaptor (1)
(JE model)
1-569-007-12
(JE model)
1-569-007-12
3-085-733-71 MANUAL, INSTRUCTION SET (ARABIC) (E)
3-085-733-81 MANUAL, INSTRUCTION SET (KOREAN) (JE, KR)
3-085-734-01 MANUAL, INSTRUCTION (for PC)(JAPANESE) (J)
3-085-733-81 MANUAL, INSTRUCTION SET (KOREAN) (JE, KR)
3-085-734-01 MANUAL, INSTRUCTION (for PC)(JAPANESE) (J)
Wrist strap (1)
3-086-283-01
3-086-283-01
Memory stick Duo Adaptor(1)
(MSAC-M2)
(not supplied)
(MSAC-M2)
(not supplied)
NP-FT1 battery pack (1)
(not supplied)
(not supplied)
Checking supplied accessories.
— 5 —
DSC-T1
Note :
The error code is cleared if the battery is removed, except defective flash unit.
*1: The error display is given in two ways.
*1: The error display is given in two ways.
Display Code
C : 3 2 : 0 1
C : 1 3 : 0 1
E : 9 1 : 0 1
E:61:00 *1
E61:10 *1
Countermeasure
Turn off the main power then back on.
Replace the memory stick.
Format the memory stick with the DSC-T1.
Format the memory stick with the DSC-T1.
Checking of flash unit or replacement of
flash unit.
flash unit.
Checking of lens drive circuit
Cause
Trouble with hardware.
• The type of memory stick that cannot be
used by this machine, is inserted.
• Data is damaged.
• Unformatted memory stick is inserted.
• Unformatted memory stick is inserted.
Abnormality when flash is being
charged.
charged.
When failed in the focus initialization.
Caution Display During Error
SYSTEM ERROR
MS ERROR
Flash LED
Flash display
Flashing at 3.2 Hz
Flash display
Flashing at 3.2 Hz
—
Self-diagnosis display
• C: ss: ss
The contents which can be handled
by customer, are displayed.
by customer, are displayed.
• E: ss: ss
The contents which can be handled
by engineer, are displayed.
by engineer, are displayed.
[Description on Self-diagnosis Display]
