Read Sony DSC-S780 Service Manual online
Sony EMCS Co.
DSC-S780
2008G0200-1
© 2008.07
Published by Kohda TEC
9-852-289-12
Revision History
Revision History
Internal memory
ON BOARD
Internal memory
ON BOARD
SERVICE MANUAL
Link
Link
SERVICE NOTE
SPECIFICATIONS
BLOCK DIAGRAM
DISASSEMBLY
REPAIR PARTS LIST
Ver. 1.1 2008.07
DIGITAL STILL CAMERA
US Model
Canadian Model
AEP Model
UK Model
E Model
Korea Model
Argentine Model
The components identified by
mark
mark
or dotted line with
mark are critical for safety.
Replace only with part num-
ber specified.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque
marque
sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DSC-S780
In case of the lens block assy, main board, or main frame assy failure,
contact your local Sony Service Headquarter for the measures.
contact your local Sony Service Headquarter for the measures.
Revised-1
Replace the previously issued
SERVICE MANUAL 9-852-289-11
with this Manual.
SERVICE MANUAL 9-852-289-11
with this Manual.
DSC-S780
— 2 —
SPECIFICATIONS
Camera
[System]
Image device:
7.18 mm (1/2.5 type) color CCD, Primary
color filter
color filter
Total pixel number of camera:
Approx. 8 286 624 pixels
Effective pixel number of camera:
Approx. 8 083 560 pixels
Lens: 3
×
zoom lens f = 5.8
–
17.4 mm (35
–
105 mm (35mm film equivalent)) F2.8 (W)
–
4.8 (T)
Exposure control: Automatic exposure, Scene
Selection (7 modes)
White balance: Automatic, Daylight, Cloudy,
Fluorescent, Incandescent, Flash
File format (DCF compliant):
Still images: Exif Ver. 2.21 JPEG compliant,
DPOF compatible
Movies: AVI (Motion JPEG)
DPOF compatible
Movies: AVI (Motion JPEG)
Recording media: Internal Memory (approx.
22 MB),
"
Memory Stick Duo
"
Flash: Flash range (ISO sensitivity
(Recommended Exposure Index) set to Auto):
approx. 0.5 to 3.5 m (1 feet 7 3/4 inches to
11 feet 5 7/8 inches) (W)/approx. 0.5 to 2.0 m
(1 feet 7 3/4 inches to 6 feet 6 3/4 inches) (T)
approx. 0.5 to 3.5 m (1 feet 7 3/4 inches to
11 feet 5 7/8 inches) (W)/approx. 0.5 to 2.0 m
(1 feet 7 3/4 inches to 6 feet 6 3/4 inches) (T)
[Input and Output connectors]
(USB) A/V OUT terminal:
Video, Audio (Monaural), USB
communication
communication
USB communication:
Hi-Speed USB (USB 2.0 compliant)
[LCD screen]
LCD panel: 6.2 cm (2.5 type) TFT drive
Total number of dots: 153 600 (640
Total number of dots: 153 600 (640
×
240) dots
BC-CSK battery charger
Power requirements: AC 100 V to 240 V, 50/
60 Hz, 2.2 W
Output voltage: DC 4.2 V, 0.33 A
Operating temperature: 0 to 40
Operating temperature: 0 to 40
(32 to 104 F)
Storage temperature:
–
20 to +60
(
–
4 to
+140 F)
Dimensions: Approx. 62
×
24
×
91 mm (2 1/2
×
31/
32
×
3 5/8 inches) (W/H/D)
Mass: Approx. 75 g (2.7 oz)
Rechargeable battery pack NP-
BK1
BK1
Used battery: Lithium-ion battery
Maximum output voltage: DC 4.2 V
Mean output voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 1.4 A
Capacity: Approx.3.4 Wh (970 mAh)
Maximum output voltage: DC 4.2 V
Mean output voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 1.4 A
Capacity: Approx.3.4 Wh (970 mAh)
Design and specifications are subject to change
without notice.
without notice.
[Power, general]
Power: Rechargeable battery pack NP-BK1, 3.6 V
AC-LS5K AC Adaptor (not supplied), 4.2 V
Power consumption (during shooting):
1.3 W
Operating temperature: 0 to 40 (32 to 104 F)
C
Storage temperature:
–
20 to +60
(
–
4 to +140
Dimensions: 90.8
×
56.0
×
26.5 mm (3 5/8
×
2 1/4
×
1
1/16 inches) (W/H/D, excluding protrusions)
Mass: Approx. 150 g (5.3 oz) (including NP-BK1
battery pack and strap, etc.)
Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible
C
F)
C
C
— 3 —
DSC-S780
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK OR DOTTED LINE WITH
MARK
MARK
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
FLEXIBLE Circuit Board Repairing
Keep the temperature of the soldering iron around 270 C
during repairing.
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering
or unsoldering.
Keep the temperature of the soldering iron around 270 C
during repairing.
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
Unleaded solder melts at a temperature about 40 C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Replace only with the same or equivalent type.
— 4 —
DSC-S780
TABLE OF CONTENTS
1.
SERVICE NOTE
1-1. Process After Fixing Flash Error ····································· 1-1
1-2.
1-2.
Method for Copying or Erasing the Data in Internal
Memory ··········································································· 1-1
Memory ··········································································· 1-1
2.
DISASSEMBLY
2-1.
Disassembly ····································································· 2-1
3.
BLOCK DIAGRAM
3-1. Overall Block Diagram ··················································· 3-1
4.
REPAIR PARTS LIST
4-1. Exploded Views ······························································· 4-1
4-1-1. Overall Section ······························································ 4-1
4-1-2. Main Frame Block ························································· 4-2
4-1-3. Cabinet (Rear) Block ····················································· 4-3
4-1-1. Overall Section ······························································ 4-1
4-1-2. Main Frame Block ························································· 4-2
4-1-3. Cabinet (Rear) Block ····················································· 4-3
4-4
4-1-4. Lens Block ·····································································
4-2. Accessories ······································································
4-5
Section
Title
Page
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2008.07