Read Sony DSC-S730 (serv.man2) Service Manual online
5-5
DSC-S730_ADJ
5-2-3. Zoom Adjustment
Perform the zoom adjustment in the conditon the camera stands up.
Adjusting in the other conditon causes the malfuncton of the zoom adjustment.
Adjustment order
Screen display
The adjustment finished normally.
The adjustment is finished abnormally.
Fig. 5-2-9
Fig. 5-2-10
Fig. 5-2-11
Fig. 5-2-12
The adjustment is complete.
Malfunction of Zoom adjust-
ment result
ment result
Malfunction of Zoom adjust-
ment Focus section
ment Focus section
Malfunction of Zoom adjust-
ment Zoom section
ment Zoom section
Set the unit to the adjustment mode.
* For the setting procedure of the adjustment mode, refer to "Preparations" (Page 5-2).
Press the control button “V”, then Zoom Adjustment starts.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
In case of the adjustment is finished normally.
the adjustment completion indication appears
on the screen. (Fig. 5-2-9)
Turn off the power to quit the adjustment mode.
the adjustment completion indication appears
on the screen. (Fig. 5-2-9)
Turn off the power to quit the adjustment mode.
In case of the adjustment is finished abnormally.
the following indication appears on the screen.
(Fig. 5-2-10 to 5-2-12)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 5-2-10 to 5-2-12)
In this case, confirm the adjusting environment
and readjust.
O Zoom Station Passed
X Focus backlash NG
X Zoom Adjust NG
X Focus backlash NG
X Zoom Adjust NG
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2008.09
Click on the first or last page to see other DSC-S730 (serv.man2) service manuals if exist.